Assembly - Coleman 8fa3 Instructions For Use Manual

Assembly

Step 1
TOOLS REQUIRED & OTHER ITEMS: (not provided)
• Standard Phillips head screwdriver
• 7/16" end wrench
• Lightweight hammer
■ Remove all components from the package.
■ See package label for listing of contents for the model you purchased.
Mosquito
Adhesive
TM
Deleto
Trap
Inhibitor
Refill
(Linalool)
Step 2
■ With a lightweight hammer, tap Axle Bushings into Base. Make sure
Bushings are fully seated.
4
• 20# propane cylinder
• One (1) AAA battery
Mosquito
Deleto TM
Octenol
Lure
Refill
Axle
Bushing
Base
■ Axle Bushings will receive the
Axle for the Wheels.
Step 3
■ Insert Axle through one
Wheel and then insert
Axle through Axle
Bushings.(Make sure
side of tire with
recessed area on hub
is to the outside.)
■ Insert Axle through
second wheel & cap
both ends with Retainer
Nuts.
■ To properly seat
Retainer Nuts, gently
tap with a hammer &
support the bottom
of Axle.
Stakes
Step 4
■ Set both feet on base.
■ Install front bar in feet.
(Actual size)
■ Assemble feet to
base using hard-
ware illustrated.