iLive IACQ60 v2400-01 User Manual
iLive IACQ60 v2400-01 User Manual

iLive IACQ60 v2400-01 User Manual

Wireless charging pad

Advertisement

Wireless Charging Pad
User's Guide for Model IACQ60 v2400-01

Features

Inductive charging
Compatible with wireless charging devices
Over current, over voltage, high temperature
and short circuit protection
Output power: 5W

Includes

Micro-USB power cable

Foreign Object Detection (FOD)

When the Charger detects a metallic or magnetic
object on the pad that will interfere with the normal
operation of the charger, the Indicator Light will flash
blue and wireless charging will automatically stop.
Indicator Light
Charging = Blue Light
FOD = Flashing Blue Light

Notes On Wireless Charging

Before using, be sure to remove the protective
film that covers the charger base where your
phone rests.
Do not leave the charger and your mobile
device unattended while charging.
Depending on the location of the charging coil
on your mobile device, your device may not
charge in all positions. Find the position that
works best for your device.
If you are using your device with a connected
headset, place the device in the landscape
position. Placing your device in the portrait
position may move its charging coil out of
position to charge.
Wireless charging may not work if you have a
case that is A) too thick or B) has a magnet. In
order to charge, you will need to remove the
case before placing on the charging pad.
If you are using an attached wireless charging
case on your mobile device, never place just the
case on the charging pad. This may overheat the
charging pad and/or the case, and has a risk of
fire and injury.
If you connect a wired or portable battery
charger to your device while it is on the
charging pad, the pad will disable wireless
charging.
The wireless charger does not have a power
switch. To save energy, unplug the wireless
charger from its power source.
The wireless charger may cause interference in
areas with weak Wi-Fi signal.
Connect the charger to a power
source like a computer or USB
power adapter (not included).
When power is connected,
place your phone on the pad to
charge.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IACQ60 v2400-01 and is the answer not in the manual?

Questions and answers

Summary of Contents for iLive IACQ60 v2400-01

  • Page 1 Wireless Charging Pad User’s Guide for Model IACQ60 v2400-01 Features • Inductive charging • Compatible with wireless charging devices • Over current, over voltage, high temperature and short circuit protection • Output power: 5W Includes • Micro-USB power cable Foreign Object Detection (FOD)
  • Page 2 Safety Warnings Customer Support • WARNING: To prevent fire or shock hazards, do not expose this Customer Service: 1-888-999-4215 | Email Support: prodinfo@ unit to rain or moisture. dpiinc.com | Email Parts: partsinfo@dpiinc.com • WARNING : Where the mains plug or appliance coupler is used For Warranty Information and the most up-to-date version of as the disconnect device, such disconnect device shall remain this User’s Guide, go to www.iLiveElectronics.com...

Table of Contents