Table of Contents
Advertisement
Machine Translated by Google
S-video
Select when connecting an external input device
using the S terminal.
Automatically output stereo
sound
automatically when receiving a stereo broadcast.
for switching to stereo sound
Settings.
1 Mm to select [Automatic
Select Tele Reception] and press .
2 Use Mm to select a setting and press .
Item list
enter
Automatically switch to stereo sound.
cut
Outputs in monaural sound.
Hide BS channels you don't watch
Unable to display unused BS channels
can be set as
1 Mm to select [BS Channel] from the TV setting screen.
channel], then press .
2 Use Mm to select a channel and press .
3 Select the setting with Mm and press .
Item list
do
Makes it impossible to select a station.
Allows
you to select a station that does not.
Check the reception status of the
BS antenna
Use Mm to select [BS Antenna Level Display]
from the TV setting screen and press .
Check the reception status of the BS antenna
I can.
the antenna level to the maximum possible
Orient the antenna so that it is close to the value
Please adjust
Setting the power supply method
for the BS antenna
1 Use Mm to select [BS ANTENNA POWER]
from the TV setting screen , then press .
2 Use Mm to select a setting and press .
Item list
enter
Power is always supplied to the BS antenna when
the unit is turned on.
cut
Does not supply power to the BS antenna.
Setting the area code for the
program guide
Channels of the same broadcasting station may differ depending on the region.
Since the files are different, it is necessary to use the program guide of this unit.
the area code for your area.
setting to display the program guide suitable for that area.
must be displayed.
1 Use Mm to select [Area code] from the TV settings screen.
number setting] and press .
2 Use Mm to select an area and press .
If you do not know the area code, refer
to "List of Guide Channels" (page 90).
Watch and listen to stations in your area
Choose the area code that contains more
please Stations in your area
can be found in the TV section of newspapers.
In the following cases, "Receiving channel
Manual setting of the guide channel
Please change the settings.
•The displayed channel in the table is different
from the TV channel
•Common use of cable TV and condominiums
If you are using a receiving system, etc., the
displayed channels in the table are different.
Set the channel for acquiring
program information in the
program guide
In "List of guide channels" (page 90)
Program guide data from broadcasting stations with "ÿ"
data is sent (as of December 2003).
1 Use Mm to select [Acquire program guide
channel] from the TV setting screen and press .
2 Use Mm to select a channel and press .
Setting the time for obtaining
program information in the
program guide
For program information on the program guide, please refer to your area
Acquisition time varies depending on mistake
If you specify a different time, the program information will be displayed correctly.
broadcast stations.
change the time unless otherwise advised by
do not change it.
Use Mm to select [Time to get TV listing review]
from the TV setting screen and press . 2 Use Mm
select the field you want to set and press . 3 Use <,
select the item you want to set, then Mm
to set. 4Once
you have set the item you want to change,
push.
please note
• Do not manually change [Program guide
acquisition channel] and [Program guide
acquisition time] except when the
broadcasting station or time to transmit
data changes due to the host station. If you
change it by mistake, you will not be able
to get the program guide. In that case,
select [Auto channel setting] from the TV
setting screen and redo the automatic
channel setting. For details, contact the
Customer Service Center (back cover).
1
to
to
67
Advertisement
Table of Contents
