Advertisement
Pieces (each bag):
1.
(4x) M4x12 screw
(4x) M4x30 screw
(4x) M4 toothed washer
2.
(4x) M5x12 screw
(4x) M5x30 screw
(4x) M5 toothed washer
3.
(4x) M6x12 screw
(4x) M6x35 screw
(4x) M6 toothed washer
Necessary tools:
Crosstip screwdriver
Metal detector for drywall-mounting
Screw wrench
Drill machine with 10 mm masonry drill
Note:
For the mounting of the wall plate introduce the level in
the tube and after the installing take it out.
Installing on a drywall construction
For a safe drywall mounting please use two wooden beams/rails placed at least at a 30 cm
distance from each other.
1. Use a metal detector to find two adjoining rails and mark their position.
2. Place the wall plate on the desired place with the help of a second person and the level.
3. Mark right and left the upper, middle and lower oblong holes, that are above the beams or rails.
4. All in all 4 or 6 places have to be marked.
5. First pre-drill a 3 mm hole in the wall.
6. Assisted by a second person, position the wall plate on the wall and place the oblong holes over
the drilled holes so that they match.
7. In each hole insert a hex lag bolt with washer.
8. Tighten the hex lag bolts clockwisely.
Beware: Do not fasten the bolts too tightly in order to avoid causing damage to the wall.
Beware: Do not let go of the wall plate, before it is properly fixed.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
4
(4x) M8x16 screw
.
(4x) M84x0 screw
(4x) M8 toothed washer
5
(4x) M4/M5 Spacer
.
(4x) M6/M8 Spacer
(4x) M4/M5 washer
6
(1x) Bubble Level
.
(6x) M86x0 Hex lag bolt
(6x) Washer
(6x Concrete rawl plugg
Seite 3
Advertisement
