Subscribe to Our Youtube Channel
Summary of Contents for Showven CREEPER ICE PLUS
- Page 1 USER MANUAL CREEPER ICE dry ice machine V1.1 2021/10/25 CREEPER ICE PLUS CREEPER ICE Showven Technologies Co., Ltd.
- Page 3 \ The area in front of machine may become wet during operation. Be aware of the slip ground. \ If the machine fails to work, please stop operation and unplug the machine. Check fuse, power cable and socket etc. carefully, if can’t solve the problem, please contact SHOWVEN (info@showven.cn) or your local SHOWVEN partner for advise.
-
Page 4: Functional Characteristics
▲Foreword Thanks for choosing SHOWVEN CREEPER ICE series dry ice machine. Please read following manual carefully and completely before operating this product. Operate according to instructions is very important for safety, and can elongate the service life of the machine. -
Page 5: Product Overview
▲Product Overview CREEPER ICE PLUS 1. Upper Cover 2. Upper Cover Lock 3. LCD and Function Buttons 4. 3-pin XLR 5. Industrial Power Socket 6. Water Level Indicator 7. Drain Valve 8. 5-pin XLR 9. Air Switch 10. LED Indicator x3... - Page 6 CREEPER ICE 1. Upper Cover 2. Upper Cover Lock 3. LCD and Function Buttons 4. LED Indicator x2 5. Fuse x2 6. Water Level Indicator 7. Auxiliary Power Input 8. Main Power Input 9. Drain 10. 5-pin XLR 11. 3-pin XLR 12.
-
Page 7: Operation Panel
▲Operation Panel 1. Control button area MENU: switch through setup menu; +: parameter up, multiplex “TIMER” (Timer Fog output when in main interface); -: parameter down, multiplex “VOLUME” (Continuous Fog output when in main interface); ENTER: confirm and save parameters (screen will blink once when save successfully); multiplex “STOP”. - Page 8 Whenever in single or dual power mode, the main power input must connected, the corresponding LED indicator will light up when power supply connected successfully. 5. CREEPER ICE PLUS use industrial power socket. Turn on the air switch when power connected, and the LED indicator will light up.
-
Page 9: Dmx Control
1s, the LCD screen will blink once, means the match was successful. NOTE: Remote controller is optional configuration. You can buy it separately from SHOWVEN or SHOWVEN authorized partners. ▲Product Package CREEPER ICE... -
Page 10: Caster Installation
▲Caster Installation Please install the caster according to below schematic diagram. The brake wheel must installed in specific position accordingly. CREEPER ICE PLUS CREEPER ICE... -
Page 11: Warranty Instructions
4. Damage caused by improper installation or use; For product damage not included in warranty range, we can provide paid service. Invoice and warranty card are necessary when applying for maintenance service from SHOWVEN. Warranty Card Product Name: Serial No. - Page 12 PREMIUM FACTORY SAS - DISTRIBUTEUR OFFICIEL 1 Route Neuve, 71710 MONTCENIS – FRANCE Office +33 805 69 13 27 | +33 608 630 452 info@premiumfactory.eu | www.premiumfactory.eu...
Need help?
Do you have a question about the CREEPER ICE PLUS and is the answer not in the manual?
Questions and answers