Download Print this page

ARMAC MARTIN Digbeth Hook How To Install

Table of Contents

Download this manual

How to install your Digbeth Hook

Please note, this hook is suitable for use as a robe hook fixed to a wall or fixed to kitchen cabinetry as a

Hook - x1

No 6 x 38 screws - x2

No 6 x 16 screws - x2

Wall plugs - x2

Allen Key 1.5mm - x1

Appropriate safety equipment i.e. safety glasses

Spirit level

Drill

Screwdriver

Tape measure

Pencil

0121 359 2111 | armacmartin.co.uk | sales@armacmartin.co.uk

tea towel holder.

The load capacity is 5kg.

Table of Contents

Need help?

Do you have a question about the Digbeth Hook and is the answer not in the manual?

Page 1 How to install your Digbeth Hook Please note, this hook is suitable for use as a robe hook fixed to a wall or fixed to kitchen cabinetry as a tea towel holder. The load capacity is 5kg. Contents Hook - x1...
Page 2 Step One Safety We strongly recommend using a wire or pipe power detector to ensure that there are no electric cables or water pipes where you intend to position the hook. Step Two Vertical Positioning To position your hook vertically, use a tape measure and spirit level to mark the position for your hook fixing plate.
Page 3 Step Five Insert Wall Plugs Insert the wall plugs into the two drilled holes. Ensure the wall plugs are fully inserted and sit flush to the surface. This is important so that your hook sits flush so tap gently with a hammer if needed. Step Six Fix Hook Screw the Hook Fixing Plate to the surface using a screwdriver and...
Page 4 Finish Care & Cleaning Thank you for purchasing your Brass Hook from Armac Martin. Our products are of the finest quality and hand finished. Please follow the below care guide to maintain the condition of the product. Wipe your product down with a soft dry cloth Do not use abrasive cleaners, ammoniated products, rubbing alcohol, detergents, astringents, bleach based cleaners, aggressive chemicals, abrasive cleaning pads, or harsh polishes on the...