Removing The Blower Shipping Bracket; Opening The Air Handling Unit - Viessmann AirflowPLUS Installation And Operating Instructions Manual

Installation

Removing the Blower Shipping Bracket

Opening the Air Handler Unit
18
Viessmann AirflowPLUS AH2A Installation, Operating and Service
1. Remove the bracket retaining thumb screws and
discard.
2. Remove the bracket and discard.
1. Remove the lower front panel retaining screws and set
aside.
2. Tilt the lower front panel forward at the top and lift
out.
3. Remove the upper front panel retaining screws and
set aside.
4. Slide the upper front panel down and pull out.