Advertisement
Assembly Instruc ons
1) Choose a site that is level, free from stones, debris and other sharp
objects. Spread out your tent organiser with the opening facing your
desired direc on as shown in Fig. A.
2) Take each fibreglass pole and assemble as shown in Fig B. Now carefully
feed the poles through the sleeves on your tent organiser, DO NOT use
excessive force. When forming the pole and feeding through the sleeve,
where possible it should be done with two people. If the pole does not
slide through, check that the fabric is not caught on the pole, especially
around the metal joints in the pole.
3) Now locate the metal p at the ends of each pole into the p
assemblies at the base of the tent organiser. Insert the pole into the hole
that is closest to the tent as shown in Fig. C.
Taking down the Tent Organiser
To take the tent organiser down follow the above steps in the reverse order, be sure to leave the
tent organiser door unzipped when folding. To fold the tent organiser up, fold in half lengthways
towards the door. Now fold in from each side un l the folded tent organiser is slightly smaller than
the carry bag. Prior to packing always clean off mud, grass and all dirt and use a damp cloth to clean
any soiled areas of your tent organiser and then dry thoroughly. Ensure the tent organiser is fully dry
before packing. DO NOT store when wet or damp. Store in a dry well-ven
Fig. A
Fig. B
c eyelet
Fig. C
place.
MADE IN CHINA
Advertisement
