Seeing Is Believing - Davco FUEL PRO 382 Technical Manual

T e c h n o l o g y , L L C
• See when NOT to change the fuel filter.
• See the condition of the fuel. Seeing what collects on the filter media or what's happening inside the clear cover
can help diagnose many fuel and mechanical conditions
• "Filter on Top" configuration. Water and debris removed from the fuel falls to the lower chamber and stays away
from the filter media resulting in longer filter life
• Built in protection when priming the fuel filter. Unfiltered fuel is kept on the "dirty" side of the filter media during
priming ensuring only clean fuel reaches the engine
• Patented media. The "Best in Class" StrataPore™ media removes 98% of free and emulsified water over the life
of the filter This far exceeds the performance of cellulose media
When new, the fuel level in the filter will be very
low with minimal restriction. As the filter is used,
contaminants collect on the filter from the bottom up
Fuel rises on the filter indicating remaining filter life
Fuel level at filter wrap level. Even though the fuel
level is now more than half of the filter element, the
fuel is still flowing through clean media at minimal
restriction levels The filter still has significant life
remaining
DAVCO Technology, LLC
®

"SEEING IS BELIEVING"

P. O. Box 487 Saline, MI 48176
TECHNICAL MANUAL
Fuel level increases in clear cover. As contaminants
collect on the filter, the fuel rises to a non-contaminat-
ed section of the filter, providing optimal filtration while
maintaining lowest restriction
The filter element is now completely covered by
fuel. At this point, all of the media's surface area is
utilized Restriction is increasing and the filter element
should be changed at the next scheduled mainte-
nance interval
Call 800-328-2611
2
FUEL PRO
®
www.davco.com
Updated 09/05/2012
382
®
F1271 REV C