Subscribe to Our Youtube Channel
Related Manuals for CyberPower RMCARD301
Summary of Contents for CyberPower RMCARD301
- Page 1 QUICK INSTALLATION GUIDE Network Management Card RMCARD301 The RMCARD301 Network Management Card provides for advanced ups management and configuration. INSTALLATION GUIDE Description:...
-
Page 2: Step 1. Hardware Installation
LED Status indicator TABLE Yellow Green Status Power ON Flashing System initial Normal operation No connection to Flashing Writing data to flash Flashing Flashing memory Green light : Power state Red light : Connection state with UPS Step 1. Hardware Installation... -
Page 3: Section 1. Install Netility
(1) Insert the RMCARD301 into the UPS management card slot (2) Connect the network cable Step 2. Configure the IP address and update the firmware. Section 1. Install Netility (1) Insert the NetAgent Utility CD to the CD-ROM driver and execute Netility.exe. - Page 4 Select DHCP, BOOTP, or Static IP. For a static IP configure the IP address, subnet mask and gateway. After configuring the settings the RMCARD301 interface is accessible using a browser or telnet. Advanced: RMCARD301 Settings In order to ensure the secure management the RMCARD301 provides two security options to control access to the management interface.
- Page 5 1. On the advanced tab select HTTP and Telnet management and the port to use for each. The default ports for each protocol can be used. 2. If using a port other than the default for HTTP (80) or Telnet (23) the full IP address and port must be used to access the RMCARD301.
- Page 6 The RMCARD301 offers a simply method to upgrade the firmware. To upgrade firmware, click Download Firmware from RMCARD301 Setup menu, click “Browser” select new firmware file (*.bin) and press “Start”. The RMCARD301's Red LED and Yellow LED will flash to indicate the firmware is upgrading.
- Page 7 (4) About - Displays details about the current version of Netility. (5) Refresh - Forces netility to scan the network for RMCARD301s. Netility will automatically scan the network or the refresh button can be used to force another scan..
-
Page 8: Section 1. Introduction
RMCARD301 Web Management Section 1. Introduction After completing the RMCARD301 installation, you will now be able to go to RMCARD301 web interface to monitor and control UPS by inputting RMCARD301 IP address in a web browser. (1) Launch a web browser (Firefox or Internet Explorer) (2) Enter the RMCARD301 IP Address previously configured e.g. - Page 9 Section 2. RMCARD301 NetAgent Web Interface There are 4 main function categories on the initial screen. 2.1 Information 2.2 Configuration 2.3 Log Information 2.4 Help Select the main category on the left and the subcategory. When using NetAgent for the first time, please enter the [Configuration] category...
- Page 10 2.1 Information Sub-Menu : 2.1.1 System Status 2.1.2 Basic Information 2.1.3 Current Status 2.1.4 Remote Control 2.1.5 Meter/Chart 2.1.1 System Status This screen displays the NetAgent system information and Network settings. Values shown here are either provided by NetAgent itself or they are user settings from the Configuration pages.
- Page 11 System Status 2.1.2 Basic Information This page displays basic information about the UPS. Values here are either provided by the UPS or they are user settings from the Configuration pages. UPS Information Information about UPS Manufacturer/UPS Firmware Version/UPS Model are provided by the UPS. Battery Information Values here are user settings from the Configuration pages.
- Page 12 Basic Information 2.1.3 Current Status This page displays the current UPS status. Users can choose an interval from the drop-down box to refresh the status readings. UPS Status This section displays the UPS power status. An abnormal status will be displayed in red when there is a power event. Input Status This section displays the UPS input status, including AC Status/Input Voltage/Input Frequency.
- Page 13 Current Status...
- Page 14 2.1.4 Remote Control This page provides test routines for the UPS. Select the specific test, then click on 'Apply' to execute it. (Please refer to the UPS manual for additional information on the individual UPS Test functions.) If you are using a Contact Closure UPS, you will only be able to use the function ' Turn off UPS when AC Failed'. Cancel Test This function cancels the current test.
- Page 15 2.1.5 Meter/Chart This page displays temperature, capacity, load, voltage..etc of the UPS with using graphic meters or charts. Meter/Chart...
Need help?
Do you have a question about the RMCARD301 and is the answer not in the manual?
Questions and answers