NETGEAR ProSafe GSM7212 Installation Manual page 17

should provide your own IP address in the above command.
If you want to use your web browser, or telnet session to manage your switch, note the IP address on the
Sysinfo page. To use your web browser, simply types the IP address in the URL address bar and hit
enter. If you want to use an SNMP management application, you will need to note the IP address and to
configure the SNMP settings in your switch so that it will respond to SNMP requests. This configuration
can be done through either the console or web browser GUI. See User Guide on how to enable SNMP
access.
Note: The switch IP address is by default using DHCP mode to assign its address. If you leave the switch
IP mode in the default DHCP mode, the IP address of your switch could change, and you would have to
reconnect to the switch via the console port to discover the new IP address. Change the IP mode to
Manual for a more reliable connection. If you need help changing the IP mode, please refer the User
Manual on the Resource CD for Managed Switches.
To learn more about the managed features on your switch, refer to the manual on the Resource CD for
Managed Switches.
Page 17 of 22