Changing The Temperature Settings - RAUMEDIC MPR1 Instructions Manual

Instructions for Use MPR1 DATALOGGER
After the temperature sensor has been connected, the display field which has been allocated to the
temperature input will display the numerical value of the temperature measured. First of all, a default setting
is rendered for the limiting alarm value, which can be changed if and when required. For data on the basic
settings of the alarm limits, the alarm activation and the settings of the alarm limits, please refer to chapter
4.9.1 Physiological alarms.
4.4.4.1

Changing the temperature settings

The right-hand column of the display holds the navigation field, in which you can use the soft keys to carry
out further adjustments or to call off information or help.
Additional settings of the temperature channels are accessed by pressing the keys T1 or T2. If you have
connected additional sensors, other soft key designations will be displayed with the defined measuring
locations.
Parameter (T1)
In this window you can use the arrow keys to select whether you want to set alarm limits and whether the
limiting value monitor of the selected measuring value is to be active or not.
Proceed correspondingly, if you want to change the settings for temperature T2.
Manufacturer:
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany
Alarm activation
Range with alarm limits
Page 50 of 98
Optical alarm T2
Other settings T1
alarm limits
Other settings T2
alarm limits
Information
(e.g.on alarms)
Press Menu key, if you want
to modify the marked field
Rev. 9, 2020-10-16
zwo-399EN