Yakkay Strap Set Two Quick Start Manual

Instructions for Strap Set Two

Strap Set Two comes in a box that contains:
- one set of straps
- one release tool specially designed by YAKKAY
- 4 extra metal pins (in reserve)
- instructional drawings
Please note: Strap Set Two only works with YAKKAY's Smart Two helmet.
You can watch our video guide here:
https://yakkay.com/pages/guides
The best way to change the straps is to sit at a table. Place a cloth on the table so you
don't scratch the surface of your Smart Two helmet.
Study the instructional drawings included in the Strap Set Two box. The instructional
drawings can also be found on our website .
https://yakkay.com/pages/guides
In the instructional drawings you can see which strap is the right strap and which is the
left strap seen from the front. The right strap ends in the female part of the chin
buckle and the left strap ends in the male part of the chin buckle.
We recommend that you replace the straps one by one to avoid mixing up the straps
(right/left).
Place your Smart Two helmet upside down on the cloth on the table (drawing 1).