PRODUCT INTRODUCTION Thanks for buying this smart helmet. It will give you new feeling of safety by cycling on the road. It can not only protect users’ life safety, but also provides versatile functions of LED turning signals for you. Meanwhile, the fashion design of smart helmet gives riders wonderful experience and excellent feelings as a beautiful landscape on the road.
HELMET Head Ventilation Helmet Power ON/OFF Left-turning Signal Lamp Rear Flashing Warning Lamp Type-C Charging Port Right-turning Signal Lamp REMOTE CONTROLLER Type-C Charging Port Status Indicators Remote Controller Body Left-turning Signal Control Key Rear Flashing Warning Light Control Key Remote Controller Power ON/OFF Key Right-turning Signal Control Key...
HELMET FUNCTIONS Helmet Power ON/OFF Long press the helmet power button to turn on the helmet. Long press again to turn off the helmet. In addition, the helmet will automatically shut down after 4 hours without any operation. Helmet Indicator When the helmet power indicator flashes slowly, which means it’s time to charge.
HOW TO WEAR YOUR HELMET 1. Adjust Lining Cushion The inner side of the helmet is provided with a pad, which can cushion and absorb sweat. You can gently tear it off and clean it. Please paste it carefully during installa on. 2.
Page 7
HOW TO WEAR YOUR HELMET 9. Fix the Buckle Finally, there is the extra part of the fixed buckle. A rubber band used to fix the excess buckle can be seen on the buckle connected with the bolt. Remove the helmet, pass the excess part of the buckle through the rubber band, and then adjust the rubber band to the appropriate fixed position.
Page 8
HOW TO WEAR YOUR HELMET 6. The Pulling & Inserting of Fasteners 5. Adjust Y-buckle 8. Recommended Tightness 7. Adjust the Tightness of the Chin 10. Correct Wearing Position 9. Fix the Buckle...
REMOTE CONTROLLER INSTALLATION 1. Prepare Prepare the remote control and fixing rubber band 2. Install First put the rubber band around the hook on one side of the remote control, then wrap the rubber band around the handlebar rod, and finally put the rubber band on the hook on the other side of the remote control.
TECHNOLOGY PARAMETERS Model YTL-A01 Material EPS PC ABS Silicone Size 27*21*17CM Weight Helmet 360g/ Controller 30g Suitable for 59cm-62cm Waterproof IPX4 Cer fica on CE EN1078/CPSC/RoHs/FCC Ba ery Capacity 420mAh Lithium Polymer Max. Power Consump on 42mAh/4.2V Working Dura on...
Page 11
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.