Page 2
71 ~ 81cm 81 ~ 90.5 cm 90.5 ~ 97 cm (28"~31.5) (31.5~35.5") (35.5~38 ") No ext. frame With 1 ext. frame With ext. frames 2.To use with extension frames, please follow the steps below. First, insert the extension pins into the holes on the outside of the gate frame.
Page 3
Correct! Correct! Top view fasten mounting cups to the wall with screws or double-coated tapes rubber pad Correct! Side view screws double-coated tapes 4.Pull out the tension bolts with rubber pads from the gate frames or extension frames and install into mounting cups. When tightened, the distances between the 4 tension knobs and the 4 rubber pads should be equal (4A).
Page 4
keep this gap about 1.5~2mm a gap between gate panel and right upper corner tighten inward and align the indicator lines 7.To use the wrench: Once the tension knobs are difficult to turn by hand, use the wrench to tighten the knobs (7A,7B) 8.Operation for locking system : 1) Switch the side part of the locking handle so locking latch is on the bottom .
gate right upper corner upper lock rod panel lock holder gate frame lower lock rod locking holder To hold the gate open for easy walk through: WARNING WARNING The hold-gate-open system can be used by adults only. Once the gate is held open, the automatic closing feature of the gate will not work anymore, so your child could move back and forth without restriction.