Page 2
System Operations 1: Important Safety Information CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Do not install this equipment in a confined or built-in space such as a bookcase or similar unit, and keep well ventilated in an open space.
Page 3
Apple TV. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an This 7000N Play supports AirPlay 2 and requires iOS 11.4 uncontrolled environment. This equipment should be installed and operated with or later.
USB firmware upgrade input The unit must be mounted on a solid, level and stable surface. Inputs Before you connect the Audiolab 7000N Play to the AC mains power, ensure your • One 12V trigger input AC mains voltage corresponds to the rating on the rear panel of the product. If in doubt, consult your dealer.
Play-Fi LED Ethernet Port 12V Trigger Analogue Output Wi-Fi Antenna DIGITAL ANALOGUE POWER TRIG COAX Made in China NETWORK PLAYER MODEL: 7000N Play LINK SET-UP ETHERNET UPDATE CONTROL OUTPUT OUTPUT AC 220-240V 50/60Hz 22W FUSE T630mA 250V FCC ID:2AO5F-7000NPLAY IC:23689 -7000NPLAY...
Page 7 5: Remote Handset Fit the Batteries 1. MUTE Press to mute and unmute the 7000N Play Open the cover and insert 2 x AAA batteries (not supplied), replace the cover. 2. VOL+ Increase the volume / move to the previous option in menu settings Always use AAA batteries and replace them in sets –...
Connect a suitable Digital Coaxial (fully screened) interconnect or Optical cable from the appropriate SPDIF output of the 7000N Play to the input of a DAC or digital 12V Trigger Connection input on your chosen amplifier or preamplifier.
Page 9
2. The COAX / Optical digital connection is recommended as the COAX and OPT outputs transfer the PCM digital signal at up to 24-bit/192kHz resolution. 3. The analogue output level can be controlled by the digital volume control within the DTS Play-Fi app, when the 7000N Play is connected to a 7000A amplifier via the USB...
• Linear (Slow): A low group delay and symmetrical input response with less ringing 7000N Play and 7000A, it is recommended to set the 7000N Play Output to Fixed. than ‘Linear’ (Fast). It offers punchier bass than ‘Linear’ (Fast), with clean highs.
Page 11
< Display Settings The auto-standby feature will put the Adjust the time period after which the Time Out 7000N Play into standby mode after 20 Never 7000N Play display will revert to your minutes of inactivity. This feature can 20 minutes...
Navigate to 'Display Options' via the menu options (use the VOL+/- buttons on the remote or buttons on the front panel and remote to navigate.) To use the 7000N Play, press the 'STANDBY' button to bring the 7000N Play out of standby. Choose and confirm by...
System Operations Page 13 9: DTS Play-Fi ® Wireless Streaming Technology DTS® Play-Fi® Features With DTS® Play-Fi® technology, stream your favourite music and content with WIRELESS SURROUND SOUND astounding audio quality, from every device that you own. All DTS Play-Fi enabled Surround yourself with sound, not wires.
Connect the Ethernet port to the LAN port of the router using a suitable cable. Market or Apple App Store. For Windows PC you can download the Play-Fi After switching on the 7000N Play, the white LED on the front panel and red Wi-Fi Windows APP from the official website: https//play-fi.com LED on the rear panel will fast-flash during the initialise phase of Wi-Fi mode.
'PlayFiXDeviceXXXXXX' from the options. ER options. (2) Open the Play-Fi APP and it will find the 7000N Play Device. Select a Wi-Fi access (2) Select a network to connect to 7000N Play, press Next. point to connect to 7000N Play, and enter your wireless network password.
If you cannot connect using the DTS Play-Fi APP, or you need to do some high-level options (6) Select your wireless router Wi-Fi network. such as setting the static IP configuration, you can set up the Audiolab 7000N Play using a web browser from your Windows PC or a Mac.
System Operations Page 17 13.APP Operations Device Selection Internet Radio The DTS Play-Fi APP allows you to control and direct streaming music to a variety of devices DTS Play-Fi has a built-in Internet Radio service that gives you access to throughout your home that use the DTS Play-Fi system.
Page 18
System Operations Page 12 Page 18 13.APP Operations Media Server SoundMachine Got a hard drive full of music? Avid digital collectors can access and Business never sounded so good! Whether it’s in an office or a stream from media servers using DTS Play-Fi. The system automatically restaurant, a retailer or a hotel, background music enhances both discovers and indexes music from DLNA and UPnP servers on your the customer and the employee experience.
Page 19
Speakers Group Spotify Group To stream music from 7000N Play to multi-room devices such as DTS Play-Fi enabled Open Set up in the DTS Play-Fi App; click the Spotify Group. Create a new group and name it, Speakers, open the DTS Play-Fi APP, find the device or speaker, give it a name and then add it.
Please keep the original receipt/invoice in case it is required for a Damage in transit that cannot be attributable to the fault of Audiolab, the warranty claim.
Page 21
Audiolab website: Other than the warranty and services set out in this warranty, to the fullest extent www.audiolab.co.uk permitted by law, Audiolab shall not be liable to you and/or any third party or entity whatsoever for:...
System Operations Page 22 15.Specifications 7000N Play Model General General Description Wireless Audio Streaming Player Standby Power Consumption <0.5W Dimensions (mm) (W x D x H) 444 x 340 x 78 - ESS Sabre ES9038Q2M Reference DAC Carton Size (mm) (W x D x H)
Need help?
Do you have a question about the 7000N Play and is the answer not in the manual?
Questions and answers