Quick Setup - Guitammer ButtKicker Concert User Manual

Page 2

Quick Setup

This section is for those who are more experienced with sound
®
system installation. The ButtKicker is a passive, 2 ohm speaker
load, which requires power from an audio power amplifier,
which in turn requires an adequate signal feed from your sound
system (Figure 1). Shaking forces are produced in the direction
of the axis of the shaker as shown (Figure 2). A positive voltage
at the red terminal wire will produce a "push" by the ButtKicker
toward its feet (red terminal is positive). It can be mounted
on the topside of a surface or inverted and mounted to the
bottom side of a surface.
Additional details are provided in the following sections.
Figure 1. System Integration
Figure 2. Shake