Midwest Manufacturing DAKOTA CLOSET 290-5609 Assembly Manual

Advertisement

Quick Links

DAKOTA CLOSET SKU #290-5609
Baskets and accessories not included
ASSEMBLE
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DAKOTA CLOSET 290-5609 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Midwest Manufacturing DAKOTA CLOSET 290-5609

  • Page 1 DAKOTA CLOSET SKU #290-5609 Baskets and accessories not included ASSEMBLE...
  • Page 2 TOOLS NEEDED: -Pencil -Tape Measure -Phillips Head Screwdriver -Stud Finder -Level -Electric Drill Step 1 Step 2 Start by marking the wood studs in the location your kit will be Using the fastener pack attach the hang rail, with the lip facing installed.
  • Page 3 Step 3 Step 4 Using a screwdriver, turn the screw at the back of the wall mount The wall mount bracket pack contains a left and right bracket. bracket to fully extend the hook arm. Install one bracket onto the center uprights in the locations shown below.
  • Page 4 Step 5 Step 6 Using a screwdriver, install the cam dowels from the cam lock Lift and hang the uprights onto the hang rail. The uprights must pack into all of the uprights. Use the notes below for location of hook into the lower rail of the hang rail as shown in image A.
  • Page 5 Step 7 Step 8 Align the cam locks from the cam lock pack over the pre-drilled Lower the shelves with installed cam locks onto the installed cam holes in the shelves, making sure the open ends match up. Firmly dowels on the uprights. Once seated, secure the shelves with a press the cam locks into the holes.
  • Page 6 Step 9 Step 10 Install the wardrobe rod supports into the center section by Using a screwdriver, turn the screws at the back of the wall mount pushing into the pre-drilled holes in the uprights. Insert the brackets until the unit is tight and flush with the wall. Place a level wardrobe rod into the wardrobe rod supports.
  • Page 7 Step 11 Complete your project by securing the closet to the wall with L-Brackets. Install L-Brackets into the top shelf and into the previously marked wall studs. If you are unable to install into the wall stud, use the included drywall anchors. ASSEMBLE...

Table of Contents