Control your iPod® with your cell phone......................13 8.4.2. Use your Spykee Cell as stereo loudspeackers for your iPod®..............14 8.4.3. Use your Spykee Cell as stereo loudspeackers for your mp3 player............14 8.5. Voice FX menu: audio recording & voice transformation ................15 8.6.
1.3. Safety instructions Choose a SAFE location to operate your Spykee Cell. Do not operate it in the street. Do not operate it in sand or in puddles. This could deteriorate its performance. Check the surface conditions through which the robot will move and be aware of obstacles.
It is the user's sole responsibility to ensure that if required he has prior permission to take a picture and/or record the voice of another person. The manufacturer, distributor or seller of your Spykee Cell will not be held liable for any inappropriate use of your robot.
Thank you for purchasing Spykee Cell. 2.1. Functions Spykee Cell is a robot to build that can be controlled from your mobile phone via wireless Bluetooth ® technology! Spykee Cell is equipped with a Bluetooth® card, a webcam, a motorised head, a microphone, 2 –...
2.3. View of robot chassis from above connector connector Sound volume Sound volume button button Pick up or Hang up Pick up or Hang up phone button phone button 2.4. View of robot chassis from below Switch button ON/OFF Switch button ON/OFF Batteries compartment Batteries compartment PREREQUISITES...
For optimum connection between your cell phone and your Spykee Cell robot, we recommend that you avoid obstacles between the two devices. BUILDING YOUR ROBOT You have just discovered your robot’s functions. You have undoubtedly already built your Spykee Cell. If you haven’t, come on, get to work!
You robot is then ready. If the red lights on your Spykee Cell do not come on after several seconds, or you do not hear the “beep” or the red optic fibers hardly light up : check the power button is definitely “ON”. If it is, your robot's batteries may be discharged so replace them.
- Replace the batteries of your robot 6.2. Spykee Cell’s hibernation When Spykee Cell is turned ON and not connected to your cell phone, it goes to sleep within 10 minutes. When Spykee Cell is in hibernation mode, his torso does not light up anymore.
Screen width: below 240 pixels width, it is recommended to install the small screen Spykee Cell application. BlackBerry®: In order to work with the Spykee Cell software, the operation system of the BlackBerry® cell phones must be the 4.2.1 version or higher.
Setting parameters for: • speed of robot movement • video size • sound volume About The company that owns Spykee Cell and the one that developed the Spykee Cell application Exit the application: disconnect Spykee Cell from your cell phone Exit...
If you press "8" a second time, the "TURBO" function is deactivated and the word is displayed in grey. Make sure you only move Spykee Cell within a maximum radius of 10 metres. If your robot moves out of range it will stop automatically, the picture will freeze and you will receive a warning message: “Connection lost: Spykee is out of range or powered off”.
Access the Music Menu Button "*" 8.4. Music menu Spykee Cell is a Made for iPod® product. It is compatible with iPod® nano and iPod® touch only. Control your iPod® with your cell phone 8.4.1. With Spykee Cell you can control your iPod® nano or iPod® touch with your cell phone. Your iPod®...
Access the Start Menu Button "*" When you are listening to music, you can continue to play with Spykee Cell, move his head, move the robot and take pictures by returning to the "Start" Menu. Use your Spykee Cell as stereo loudspeackers for your iPod®...
8.5. Voice FX menu: audio recording & voice transformation Apart from the light and sound special effects pre-recorded in your Spykee Cell, you can also personalise your robot by recording your voice and processing or morphing it if desired. You can then play this recording from your robot.
This function is available only on some Sony Ericsson compatible cell phones. When you receive an SMS, Spykee Cell tells you: « You’ve got a message ». It is an automatic function. You do not need to configure your robot or your cell phone.
Moves the Robot Button “8” Activates the TURBO Function Button “OK” Takes a Picture Button “2" Raise the head of Spykee Cell Button “5” Lower the head of Spykee Cell Button “7" Play or Pause music Buttons "1", "3", "4" and "6"...
In robot control mode (Start), I do not have a picture or the picture is frozen Check the batteries on your robot. The Spykee Cell robot might be beyond Bluetooth® range. Move closer to your Spykee robot (one or more steps): if connection does not happen automatically, reconnect manually.
Need help?
Do you have a question about the SPYKEE CELL and is the answer not in the manual?
Questions and answers