Advertisement
Quick Links
Advertisement
Summary of Contents for Float Plus PRO 2
- Page 1 PRO 2 Compact 2...
- Page 2 • engine housing: Anti-weed ring PRO 2 • IP66 waterproof case:...
- Page 3 PRO 2 Caution: When using for the first time, connect the battery plug to the battery and charge the system fully. Make sure the remote control is correctly placed in the charging station.
- Page 4 • Connecting the battery: FP 20101 FP 20102 A cable FP20101 with two rings is supplied as standard for a battery. A Float Plus battery requires a cable with two waterproof connectors (FP20102). WARNING: All cases are IP66 water resistant.
- Page 5 Turn the control knob counter clockwise past the zero point to reverse. Reversing is possible with the PRO 2 and Compact Edition 2. Engine power and battery power consumption: The number indicates the percentage of the engine power e.g., the number 50 indicates that you are using 50% of the engine power.
- Page 6 Setting menu: In the Setting menu, you can select a language and select a battery. You can navigate to the Setting menu from the main screen by pressing the push button for 8 seconds. After 3 seconds, the remote control will off and subsequently, the Settings menu will appear.
- Page 7 Battery choice: You can select the battery by turning the control knob in the settings menu. Press the push button once to confirm your battery choice. Your battery choice icon will now appear when you open the settings menu. If you want to change your battery later, you can do this by selecting a different battery.
- Page 8 Firmware update: This function is only for Float Plus certified dealers. Firmware update Factory reset: All settings will be reset to the default values with this function. Factory reset...
- Page 9 Charging the remote control battery: Pro 2: Put the remote control into the charging station in the case. Look whether the micro-USB plug is placed properly (this is hidden). Compact 2: use the separate usb cable. The remote control is chargeable with every 5V USB port or adapter.
- Page 11 • Easy strap assembly: white = glue Glue the rubber strip on your black = no glue bellyboat without glueing the loops. Place the strap through the loops and leave about 5 cm overhanging. Place the case in the middle and tighten the strap with the felcro.
- Page 12 LIMITED GUARANTEE Float Plus® guarantees that its products are free of faults, on condition that they are installed and used correctly, and operate for a period of two (2) years, excluding the battery. The guarantee of the battery is one (1) year from the date of first purchase (the guarantee period).