Advertisement
Quick Links
ecosteam
Scientific Steam Technology
Operating Manual
IMPORTANT
• Please read this owner's manual thoroughly before
installing and operating your iron.
• Please retain this owner's manual for future reference after
reading it thoroughly.
T
Series
- All Steam Iron
.
Model No
™
T2, T3, T4 & T6
1
Advertisement
Summary of Contents for ecosteam T Series
- Page 1 ™ Scientific Steam Technology Operating Manual Series - All Steam Iron Model No T2, T3, T4 & T6 IMPORTANT • Please read this owner’s manual thoroughly before installing and operating your iron. • Please retain this owner’s manual for future reference after...
- Page 2 Series - Model No. T2, T3, T4 & T6 ™ Thank you for purchasing the ecosteam Series All-Steam Iron. The ™ All-Steam Iron uses a steam supply connected to a boiler. Please read this instruction manual carefully before using the iron to ensure its longest possible life.
- Page 3 OPERATING MANUAL ecosteam Series - Model No. T2, T3, T4 & T6 ™ Connect one end of the other hose to the returning line of the boiler and the other end to the Hose Fitting (Part# TEVC) of the iron. (Fig.2) Fasten the cap nut of the hose while holding the hex-part of the Hose Fitting on the iron firmly with another wrench.
- Page 4 OPERATING MANUAL ecosteam Series - Model No. T2, T3, T4 & T6 ™ IMPORTANT ➢ Before you start ironing, turn the Black Knob on the Exhaust Valve counterclockwise so that any possible condensation formed by installation is released back through the return line into the boiler.
- Page 5 ➢ Prior to your next operation, repeat the above-mentioned procedures. In the event that you encounter technical difficulties with the iron, please contact your local Authorized Dealer from whom the ecosteam™ iron was purchased. Only skilled mechanics should attempt any repairs on an iron.
- Page 6 OPERATING MANUAL ecosteam Series - Model No. T2, T3, T4 & T6 ™ (Problem) The steam flow is not sufficient (Solution ) Refer to the “Adjusting the Steam Volume” section of this manual. After the steam flow is adjusted, fasten the Black Cap Nut over the Adjusting Screw to lock it in place.
- Page 7 OPERATING MANUAL ecosteam Series - Model No. T2, T3, T4 & T6 ™ ➢ Check to make sure the hoses are in good working order. Replace if crimped or bent. Make sure there is no debris in them by taking them off the iron and blowing air through them.
- Page 8 PARTS BREAK DOWN ecosteam Series - Model No. T2, T3, T4 & T6 ™ ...
- Page 9 PART LIST ecosteam Series - Model No. T2, T3, T4 & T6 ™ Part No. Name Description • Handle Tip Screw TS-007-1 Handle Assembly • Handle Tip • Handle Nut • Handle • Lever Clamp T8600-1 Steam Regulator • Lever Clamp Screw & Washer Assembly •...
- Page 10 6 Months Limited Warranty ecosteam™ All-Steam Iron is tested and inspected before leaving our factory. We warrant to the original user of this product that it will be free from defects in material and workmanship for 6 months from date of purchase. With...
Need help?
Do you have a question about the T Series and is the answer not in the manual?
Questions and answers