pdlux PD-PIR69 Instructions

PRODUCT INFORMATION
The product is a kind of energy-saving automatic lamp, which can be on when
someone comes and off after leaves. it can identify day and night automatically. It
adopts a high-stable sensor and integrated IC, its performance is stable and
reliable. When someone enters the detection range, infrared sensor will trigger the
lamp work, the lamp turn on and after some time it turn off.
SPECIFICATIONS
Power source: 220-240V/AC
100-130V/AC
100-240VAC
Power frequency:50/60Hz
Rated load:75Wx2 Max., JD bulb
Time setting: 5sec~10min±2min(adjustable)
Light-control: 10LUX~daylight(adjustable)
SENSOR INFORMATION
FUNCTION
●It can identify automatically day and night, what's more, working light can be adjusted freely, so it can work
automatically at night and stop in the daytime;
●Sensitivity is adjustable, by adjusting SENS to adjust sense distance;
●Time setting(TIME) can be adjusted; users can adjust it according to local condition.
INSTALLATION
1.Choose installation place as your need, mark two installation holes with a pencil.
2.Place the lamp in a safe place avoiding some unnecessary damage.
3.On the sign bore two installation holes(Φ6mm , height 35mm).
4.Strike the plastic dilatant into the two holes.
www.pdlux.com
Infrared Sensor Lamp
Correct moving orientation
Tel: 86-574-83008608
PD-PIR69 instruction
165mm
Detection angle(22°C): 120°
Detection range: 12m Max.(adjustable)
Woking temperature: -10°C~+40°C
Woking humidity: ≤93%RH
Installation height: 1.5~3m
Weight: about 0.642kg
IP: 44
12m
250mm
74mm
120°
Detection angle