Honda HR-V Manual page 446

Table of Contents

Advertisement

23 HR-V HEV Sss (KE KG)-323N06100.book 445 ページ 2022年8月5日 金曜日 午前9時6分
When the System can be Used
The system can be used when the following conditions are met.
• The lane in which you are driving has detectable lane markers on both sides, and
your vehicle is in the centre of the lane.
• The vehicle is travelling between about 72 and 180 km/h (45 and 112 mph).
• You are driving on a straight or slightly curved road.
• The turn signals are off.
• The brake pedal is not depressed.
How to activate the system
LKAS Button
a
Lane Lines (white)
b
Lane Keeping Assist System
c
(LKAS) Indicator (white)
1. Press the LKAS button.
u
LKAS indicator (white) appears on the
gauge.
The system is standby.
u
If traffic lane lines are detected, white
lines appear on the gauge.
uuHonda SensinguLane Keeping Assist System (LKAS)
1When the System can be Used
If the vehicle drifts towards either left or right lane
line due to the system applying torque, turn off the
LKAS and have your vehicle checked by a dealer.
Be sure to keep the following below to activate the
system properly;
Always keep the windscreen around the front wide
view camera clean.
When cleaning the windscreen, be careful not to
apply windscreen cleanser to the camera lens.
Do not touch the front wide view camera lens.
Do not attach a sticker to the area around the front
wide view camera.
If LKAS button is pressed when the system can be
used, LKAS is on without standby.
Continued
445

Advertisement

Table of Contents
loading

Table of Contents