Table of Contents
Advertisement
Fault
E:61-03 will light up
alternately. Water is
not drained.
Cause and troubleshooting
Not an appliance fault. Siphon connection is still
closed or the wastewater hose is kinked or blocked.
Check the connection to the siphon and open if ne-
1.
cessary.
Install wastewater hose without kinks.
2.
Remove residues.
3.
Note: This is not an appliance fault. The appliance has
detected a problem during drainage. It is very likely
that the user or installer can solve this problem.
Please note that faults caused by the user or installa-
tion are not covered by the guarantee and will be
billed.
Not an appliance fault. Wastewater pump is blocked
or the cover of the wastewater pump is loose.
Clean the wastewater pump.
1.
→ "Clean wastewater pump", Page 51
Secure the cover of the wastewater pump so it
2.
clicks into position.
→ "Clean wastewater pump", Page 51
Note: This is not an appliance fault. The appliance has
detected a problem during drainage. It is very likely
that the user or installer can solve this problem.
Please note that faults caused by the user or installa-
tion are not covered by the guarantee and will be
billed.
Troubleshooting en
47
Advertisement
Table of Contents
