Siemens WM12N1M7GR User Manual And Installation Instructions page 47

Hide thumbs Also See for WM12N1M7GR:
Table of Contents

Advertisement

Fault
"E:36 / -25 / -26"
lights up.
flashes.
All other error codes.
The appliance is not
working.
The programme does
not start.
Cause and troubleshooting
Drain pump is blocked.
→ "Cleaning the drain pump", Page 41
The water pressure is low.
No remedial action possible.
The filters in the water inflow are blocked.
Clean the filters in the water inflow → Page 43.
The tap is turned off.
Turn on the tap.
The water inlet hose is kinked or jammed.
Ensure that the water inlet hose is not kinked or
jammed.
The temperature is too high.
Wait until the temperature has dropped.
→ "Cancelling the programme", Page 36
Water level is too high.
Start the Άντληση  programme.
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Έναρξη / Προσθήκη ρούχων to start the pro-
4.
gramme.
Door is not closed.
Close the door.
1.
Press Έναρξη / Προσθήκη ρούχων to start the pro-
2.
gramme.
Malfunction
Call the after-sales service.
→ "Customer Service", Page 56
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your kitchen or other
appliances are working.
You have not pressed Έναρξη / Προσθήκη ρούχων.
Press Έναρξη / Προσθήκη ρούχων.
Door is not closed.
Troubleshooting en
47

Advertisement

Table of Contents
loading

Table of Contents