SYNCO MC3-LITE - 4-Channel Ultra-Compact Audio Mixer Manual

SYNCO MC3-LITE - 4-Channel Ultra-Compact Audio Mixer Manual

Advertisement

SYNCO MC3-LITE - 4-Channel Ultra-Compact Audio Mixer Manual

Please read this manual carefully before use and follow all instructions mentioned herein.

Caring For Your SYNCO Product

  • Please keep the product in a dry, clean, dust-free environment.
  • Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
  • Use only a soft and dry cloth for cleaning the product.
  • Malfunction may be caused by dropping, impact of external force.
  • Do not attempt to disassemble the product. Doing so voids warranty.
  • Please have the product checked or repaired by authorized technicians if any malfunctions happened.
  • Failure to follow all the instructions may result in mechanics damage.
  • Warranty does not apply to human errors.

Package List

Package List

Product Introduction

Product Introduction

  1. Power Button & Power Indicator
    Press to turn on/off the system.
    When the system is on, the indicator stays on yellow. Power Button & Power Indicator
    Power Button & Power Indicator
  2. Wireless Connection Button & Wireless Control Indicator
    Press the button, turn to Bluetooth interface on your phone and find "MC3-LITE" for connection.
    The indicator stays on blue when the function is on.
    Wireless Connection Button & Wireless Control Indicator
  3. Low Battery Indicator
    When the battery is running low, the indicator would stay on red.
  4. Charging Indicator
    The indicator stays on green during charging procedure and is off once charging is fulfilled.
  5. Stepless Gain Control Dial
    Separate gain control dial is provided for each output port.
  6. Monitoring/Output Switch
    Switch the 3.5mm jack to Monitoring or Output as needed.
  7. 3.5mm Output Jack
    To connect with mobile devices.
    3.5mm Output Jack
  8. 3.5mm Output/Monitoring Jack
    Depending on the Monitoring/Output Switch, this jack can be switched between output or monitoring. Headphones can be plugged into this interface for monitoring.
    3.5mm Output/Monitoring Jack
  9. Type-C Charging Port
    For charging the MC3-LITE via the included charging cable; charging while recording is available.
  10. 3.5mm Line-in Jack
    To connect with a media player or other audio device.
    3.5mm Line-in Jack
  11. 3.5mm Mic-in Jack
    To connect with microphone; Stereo input supported.
    3.5mm Mic-in Jack

Specifications

Output Jack 3.5mm Line-In
3.5mm Mic-In
Wireless Connection Input
Input Jack 3.5mm Stereo Input
Audio Distortion
Frequency Response 20Hz-20KHz
SNR >95dB
Gain Control -15~15dB
Input Voltage / Currency 5V/500mA
Monitoring Output Power 76mW
Monitoring Output Impedance 32Ω
Material Metal
Weight 156g
Dimensions 87*65*34mm
Battery Life 4H
Battery Capacity 500mAh

Guangzhou Zhiying Technology Co., Ltd

Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download SYNCO MC3-LITE - 4-Channel Ultra-Compact Audio Mixer Manual

Advertisement

Need help?

Need help?

Do you have a question about the MC3-LITE and is the answer not in the manual?

Questions and answers

Table of Contents