Fpga Memory - Keysight Technologies S5040A Security Manual

1.1.2: FPGA Memory

Keysight S5040A Open RAN Studio Player and Capture Appliance Security Manual
Memory Characteristic
Memory sanitization
Memory removal
Memory validation
The S5040A Appliance supports the following FPGA type:
• XCVU9P-L2FLGB2104E (Xilinx Virtex
Memory Characteristic
Memory Size
User-accessible as a
mass storage device?
Writable During Normal
Operation?
User data stored in
device?
Data Retained When
Powered Off?
Purpose/ Contents
Storage remarks
Data Input Method
Location in Instrument
Memory clearing
Security Guidelines for Keysight S5040A Appliance
Description
This memory does not contain user-accessible information,
therefore sanitization is not applicable, and there is no provision for
sanitizing this memory.
This memory is not accessible to the instrument user and therefore
need not be cleared or sanitized.
Not required.
®
UltraScale+
Description
• Total Block RAM — 75.9 Mbits
• Ultra RAM — 270 Mbits
No
Yes
Yes
No
Stores:
• Firmware image in the Static region
• Intelligent / User-Programmed data in the Sandbox region
User data stored and accessible until Appliance is powered off.
FPGA programmable interface or API.
FPGA Sandbox region.
Shut down the Appliance to clear the firmware information from the
Static region and user data from Sandbox region.
1
TM
VU9P)
13