Jameson RCC-750 Operation Manual

9"
The RCC-750 has a ratchet mechanism that has been
designed to withstand the stress of 750 MCM copper
and aluminum cables. The blades have a 100% cutting
surface which provides the best possible cutting leverage.
A thumb release lever allows the operator to back out of
a cut when necessary. A locking mechanism closes the
handles for easy storage.
NOTE: DO NOT CUT STEEL.
Read and understand all of the instructions and safety
information in this manual before operating or servicing this
tool. This safety alert symbol indicates a potential personal
injury hazard; it is not used for messages related to property
damage only.
Wear eye protection when operating this tool. Failure to
wear eye protection could result in serious eye injury from
flying debris.
OPERATION MANUAL
Part Number
RCC-750 Ratcheting Cable Cutter
Specifications
Weight 2 lbs.
Size 9" L
Handle Span 6.5"
Cutting Capacities 750 MCM, 400mm
Materials Aluminum or Copper. Do not use on Steel or ACSR
• Thumb Lever to Release the Blade
• Ratchet System
• Handle lock mechanism
6.5"
Electric Shock hazard: Use proper personal protective
equipment when using this unit near energized electrical
lines. Never use the tool on live electrical circuits.
Pinch Point Hazard: Compression Dies at high force can
cause severe personal injury. Keep all body parts away
from moving parts of the tool while operating.
800.346.1956
Description
max, (Ø 22mm, 0.866")
2
Features
|
JAMESONTOOLS.COM 1