Advertisement
Operating the Red Sea
Using the Polarity Switches
The polarity switches can be a very useful and powerful tool, not only to phase correct your stereo
loops, but also provide a stereo widening effect.
When running amp modelers or drive pedals in parallel, often times they will be out of polarity with
each other. When this happens various frequencies will end up canceling each other out. When
this happens you will experience two things that will affect your tone 1) it is quite common to
loose bass frequencies leaving your tone thin and less full sounding 2) anytime frequencies are
removed, this results in a volume drop and your signal will not be as loud.
With the Red Sea we fix these issues with our two polarity switches, each switch will invert the
polarity for Return Jack 1 & 3 respectively. This will ensure both stereo loops will remain in phase
with each other.
Advertisement
