Yardfully RAISED GARDEN BED Assembly Manual

RAISED GARDEN BED
ASSEMBLY GUIDE
The YARDFULLY™ Raised Garden Bed is made
from high-strength flexible HDPE materials,
which provides a stable structure for your raised
beds while also allowing customizable shapes
and contours. The Yardfully Raised Garden Bed
is fast and easy to set up, and typically requires
no tools for assembly.
MATERIALS INCLUDED IN KIT:
• (2) Raised bed HDPE strips (each strip is
6 inches wide by 12 feet long)
• (2) Closure keys
• (12) Stakes
RECOMMENDED SOIL
MIXTURE (not included):
• 1 Part = Potting Soil
• 2 Parts = Compost
(from your Yardfully GEOBIN
or home compost system)
• 3 Parts = Topsoil
RECOMMENDED TOOLS:
• Rake or shovel for surface preparation
(as needed)
• Work gloves
1
2
Composter
®
™
Prepare the surface for installation
• Find your ideal location.
• Level the existing ground, if necessary.
Assemble the raised garden bed
• Remove the raised garden bed strips from the box.
• Roll out the strips and lay them flat on the ground.
If necessary, allow the strips to lay in the sun for a
few hours. This will allow the material to relax and
release residual curl.
• Once expanded, turn the strips upright and adjust to
your preferred shape.