EINHELL XU1 XMT-701U Additonal Operating & Safety Instructions page 2

Items supplied Danger!
Please check that the article is complete as Sound and vibration
specifi ed in the scope of delivery. If parts are Sound and vibration values were measured in
missing, please contact our service center or the accordance with EN 60745.
sales outlet where you made your purchase at
the latest within 5 working days after purchasing L sound pressure level ....................... 83 dB(A)
pA
the product and upon presentation of a valid bill
K uncertainty ............................................. 3 dB
pA
of purchase. Also, refer to the warranty table in
L sound power level ......................... 94 dB(A)
the service information at the end of the operating WA
K uncertainty ............................................. 3 dB
instructions.
WA
•
Open the packaging and take out the equip-
Wear ear-muff s.
ment with care.
The impact of noise can cause damage to hea-
•
Remove the packaging material and any
ring.
packaging and/or transportation braces (if
available).
Total vibration values (vector sum of three direc-
•
Check to see if all items are supplied.
tions) determined in accordance with EN 60745.
•
Inspect the equipment and accessories for
transport damage.
Handle
•
If possible, please keep the packaging until
Vibration emission value a
the end of the guarantee period.
K uncertainty = 1.5 m/s
Danger!
The specifi ed vibration value was established in
The equipment and packaging material are
accordance with a standardized testing method. It
not toys. Do not let children play with plastic
may change according to how the electric equip-
bags, foils or small parts. There is a danger of
ment is used and may exceed the specifi ed value
swallowing or suff ocating!
in exceptional circumstances.
Proper use
The specifi ed vibration value can be used to
The equipment is designed for the sanding/grin-
compare the equipment with other electric power
ding of wood, iron, plastic and similar materials
tools.
using the appropriate sanding/grinding paper.
Furthermore, the equipment is intended for sawi-
The specifi ed vibration value can be used for initi-
ng wood, plastic and similar materials, as well as
al assessment of a harmful eff ect.
scraping off glued carpets, fi lling compound resi-
dues, old paint and similar applications.
Keep the noise emissions and vibrations to a
minimum.
The equipment is to be used only for its prescri-
•
Only use appliances which are in perfect wor-
bed purpose. Any other use is deemed to be a
king order.
case of misuse. The user / operator and not the
•
Service and clean the appliance regularly.
manufacturer will be liable for any damage or inju-
•
Adapt your working style to suit the appliance.
ries of any kind caused as a result of this.
•
Do not overload the appliance.
•
Have the appliance serviced whenever
Please note that our equipment has not been de-
necessary.
signed for use in commercial, trade or industrial
•
Switch the appliance off when it is not in use.
applications. Our warranty will be voided if the
•
Wear protective gloves.
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Technical data
Mains voltage: ........................ 230-240 V ~ 50 Hz
Power input: .............................................. 250 W
Idling speed: ............................ 15000-21000/min
Sanding/grinding area: .............. 92 x 92 x 92 mm
Oscillation angle: ...........................................3.2°
Protection class: ............................................ II/
Caution!
Residual risks
Even if you use this electric power tool in ac-
cordance with instructions, certain residual
risks cannot be rules out. The following ha-
zards may arise in connection with the equip-
ment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protecti-
on is used.
3. Health damage caused by hand-arm vibra-
tions if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
= 3.332 m/s
2
h
2
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to
the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.
size 445 x 210 mm