Advertisement
QIS AnPro180 Connect Layout
AnPro 180 QIS Connector Layout
1.Every stick has one female socket.
2.Every Female Socket is in the middle of stick.
Sign Cabinet Installation Overview
Power Distribution Connector
Double-end Male Connector
(PDC)
18in Wire (18AWG)
1.Install the QIS sticks in the cabinet.
2. Use the 18" double-end male connector to connect each stick together as shown above.
3. Use Double-end male connector to connect sticks to the Power Distribution Connector.
4. Use appropriate length Double-end male connector to connect G2G power supply to PDC.
Double-end Male Connector 4ft
Double-end Male Connector 7ft
Jacketed Cable (18AWG)
Jacketed Cable (18AWG)
12V 60W Power Supply
Advertisement
