Advertisement

FEHN ASSEMBLY INSTRUCTIONS

WARNING

Please read this warning carefully before using the FEHN.
The FEHN is different than any other chair on the market,
and requires some time and care when using it.
The Assembly and Setup Instructions must be strictly followed. The FEHN should
always be used directly on the floor or other solid, level surface.
Height and Weight Limits:
- Standard Height Model #s 700S-R, 700L-R, 700E-R:
- Tall Height Model #s 700S-T, 700L-T, 700E-T:
*If you are not sure what model chair you have, check the label on the chair
frame. That label includes the model# as well as the height and weight limits.
Children under the age of 14 should not use the FEHN.
The seat is designed to move freely. It rocks and swivels 360 degrees. You should
use caution getting in and out of the FEHN; use the handles to stabilize
yourself.
Always have both feet fully supported by the foot rests or the floor when using
the FEHN.
Wearing pumps or stiletto heels on the FEHN is not recommended.
Do not lean sideways on the FEHN
Do not sit on the foot rest.
Always adjust the chair position, height and spring tension as described in the
FEHN Setup Instructions.
The FEHN is for indoor use only. Do not store the FEHN outdoors, near water, or
at high humidity levels.
max weight: 250lbs
max height: 6'1"
max weight: 300lbs
max height: 6'5"
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 700S-R and is the answer not in the manual?

Questions and answers

Summary of Contents for FEHN 700S-R

  • Page 1 Do not sit on the foot rest. • Always adjust the chair position, height and spring tension as described in the FEHN Setup Instructions. • The FEHN is for indoor use only. Do not store the FEHN outdoors, near water, or at high humidity levels.
  • Page 2 FEHN ASSEMBLY INSTRUCTIONS In the Box Base Assembly 1 ea 5/16" Socket Head Bolt 2 ea 1/4" Allen Wrench 1 ea Knob 1 ea Seat 1 ea Bronze Washer 1 ea Quick Release Pin 1 ea Step 1: arms •...
  • Page 3 Do Not sit on the Fehn unless you are certain that the bottom of the Brass Piston is securely locked into the Piston Lock Pocket. • (If you later need to fold the Fehn up for transport, use the Pull Pin to release the Brass Piston from the Piston Lock Pocket)
  • Page 4 Once the seat is in the Seat Mount Block, insert the Quick Release Pin (G) into the lower hole on the Seat Mount Block to secure the seat in place. DO NOT USE THE FEHN WITHOUT INSTALLING THE QUICK RELEASE PIN PROPERLY.

This manual is also suitable for:

700l-r700e-r700s-t700l-t700e-t

Table of Contents