Advertisement
Available languages
Available languages
Giving power to BT6000
BT6000 is always ON and in standby (the LED indicates the battery level). In order to start the Bluetooth signal, press and
release the ON/OFF button on the front of BT6000; the Bluetooth LED starts flashing quickly (every 500 milliseconds). When
the Bluetooth connection is established, the battery LED is OFF.
Identifying BT6000 from a PC
In the window "Devices and Printers", add the device BT6000 which is identified as "BT6000" (or "CMB232BAT"). Once the
Bluetooth connection is established, the button/LED on the front of BT6000 will remain ON.
Notice: enter "1234" as the association code.
For connection to BT6000, select the output serial port indicated as "Bluetooth Serial" (e.g. COM21)
When using "Paytec Configurator" on a PC/notebook, operators can collect audit data, write/read system configuration and
enter P3000/P6000 Emulator. For PDAs, tablets and smartphones, users must follow the directions given by the software
supplier.
Cutting power to BT6000
BT6000 is always in stand-by. After data have been collected, press and release the ON/OFF button to cut Bluetooth
connection; the device is now in stand-by again (the number of flashings of the battery LED indicates battery level).
Specifications BT6000
•
Weight: 80 g.
•
Size: 65 x 40 x 20 mm.
•
3.7 V, 1000 mAh Li-Ion battery, rechargeable by USB. The battery life depends on the use of the device (60 hours max.
without recharging, 2 hours min. when feeding another device through Db9). Maximum charging time from 2 to 3 hours
(with a 5V/1A charger)
•
Ultra low consumption microprocessor
•
BT6000 uses Bluetooth 2.0+EDR class 2, with a communication range of 70 m. max. Also compatible with Bluetooth 1.1
•
LED to indicate state of Bluetooth connection and battery level
•
RS232 Sub-D9 male connector
•
USB Mini-B connector for battery recharging and configuring operations
The information contained in this user guide and technical details are subject to change without prior notice and are not binding for Payment
Technologies S.r.l. This document contains information on property, all rights reserved. No part of this document may be copied, transmitted,
stored or translated into another language without prior written authorization by Payment Technologies S.r.l., except where allowed by local
laws.
Rev. AB 11/2016
Advertisement
