Download Print this page
NetMedia NM-kickAMP-40 Specifications

NetMedia NM-kickAMP-40 Specifications

40 watt stereo amplifier miniature class-d digital audio amp

Advertisement

Quick Links

NM-kickAMP-40
The NetMedia® kickAMP™ is a miniature digital Class-D 40 Watt (2 x 20W) stereo audio amplifier that enables laptop
computers, musical instruments, and portable media players (iPod®, MP3/CD/DVD players) to drive audio through
conventional floor, wall, bookshelf, or ceiling speakers. Designed for consumers on the go, kickAMP-40™ is perfect for
homes, hotels, dormitories, churches, barracks, or anywhere its small size and big sound will enhance work or play.
Product Includes:
1. Amplifier Assembly (Left and Right Speaker Connectors,
Audio Input Connector, Power Input Connector, Power LED).
2. 3.5mm Male-to-Male Stereo Audio Cable.
3. 24V DC 2A Power Transformer.

Audio Input

Stereo input connects
to audio source with
included Audio Cable.
Left Speaker Output
Use quick-connector to easily
attach and detach left speaker
for maximum portability.
FEATURES
Class-D stereo digital 40 Watt audio ampli er
Works with iPod®, laptops, MP3/CD/DVD players
Small, light, durable, for portable sound power
Drives oor, bookshelf, ceiling, and wall speakers
Speaker quick-connectors for easy portability
Runs cool and green at 92% e ciency
Quiet, fanless operation
Rugged aluminum case
Includes 24V DC 2 Amp Power Supply
1 year limited warranty
© 2008 NetMedia Inc. All rights reserved. NetMedia, kickAMP and kickAMP-40 are either registered trademarks or trademarks of NetMedia, Inc. iPod is a registered trademark of Apple Computer
Inc. in the United States and/or other countries. Any other trademarks or trade names mentioned are the property of their respective owners.
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com
40 Watt Stereo Amplifier
Miniature Class-D Digital Audio Amp
(-) Screw
(+) Screw
Terminal
Terminal
SPECIFICATIONS
Output:
THD:
Signal to Noise Ratio:
Input Impedance:
Audio Input Voltage:
Power Requirement:
Size:
Weight:
(-) Screw
(+) Screw
Terminal
Terminal
40 Watts @ 8 ohms (2 x 20 W)
2.7" long x 2.2" wide x 1.0" high
Power Input
Connects 24V DC 2A power.
You must connect power
transformer here before
plugging it into the wall.
Power LED
Indicates that ampifier
is properly powered on.
Right Speaker Output
Use quick-connector to easily
attach and detach left speaker
for maximum portability.
0.11% at 50% Power
> 99dB
16K ohms
0-4V peak to peak
24V DC 2A
5.6 oz.
(subject to change without notice)
MAN-kickAMP-40
REV0803A

Advertisement

loading
Need help?

Need help?

Do you have a question about the NM-kickAMP-40 and is the answer not in the manual?

Questions and answers

Summary of Contents for NetMedia NM-kickAMP-40

  • Page 1: Audio Input

    NM-kickAMP-40 The NetMedia® kickAMP™ is a miniature digital Class-D 40 Watt (2 x 20W) stereo audio amplifier that enables laptop computers, musical instruments, and portable media players (iPod®, MP3/CD/DVD players) to drive audio through conventional floor, wall, bookshelf, or ceiling speakers. Designed for consumers on the go, kickAMP-40™ is perfect for homes, hotels, dormitories, churches, barracks, or anywhere its small size and big sound will enhance work or play.
  • Page 2: Setup Procedures

    NM-kickAMP-40 Setup Procedures: 1. Connect each speaker wire’s “+” and “-” leads to the kickAMP’s Left and Right Speaker Output “+” and “-” termi- nals. Tighten the terminal screws to secure the connections. You may also detach the quick-connectors from the amplifier assembly to aid installation or to easily move the unit between locations.
  • Page 3 Type of Equipment: Audio Amplifier Model: NM-kickAMP-40 to which this declaration relates are in conformity with the Title 47 of the US Code of Federal Regulations, Part 15 covering Class B digital devices.
  • Page 4 Q- Why aren’t there any volume or other controls on the kickAMP™? A- Volume, equalization, and left/right balance are centrally controlled by the audio input device. Therefore, the audio device must have at least a volume control in order to connect it to the kickAMP. Q- Why does the sound sometimes cut out when I’m playing my music loud? A- The kickAMP’s automatic protection circuitry is momentarily shutting the unit down.