Related Manuals for Episode EVC-100R
Summary of Contents for Episode EVC-100R
- Page 1 OWNER’S MANUAL >>VOLUME CONTROL EVC-100R, EVC-100S INTRODUCTION & PRE CONSTRUCTION WIRING/SETTING THE IMPEDANCE EXAMPLE/INSTALLATION & WIRING 4/5/6 DIAGRAM SPECIFICATIONS...
- Page 2 PRE-CONSTRUCTION Both the EVC-100R and the EVC-100S fit easily into the majority of 18 cubic inch single-gang boxes and rings available today. If local building code allows, use of a ring provides for the easiest installation as the full depth of the wall is accessible.
- Page 3 • In existing construction installations, check for obstructions such as any pipes, conduit or wiring before cutting into drywall. SETTING THE IMPEDANCE SWITCH A single switch on the EVC-100R and the EVC-100S changes the impedance setting of the volume control. Three factors determine the correct setting: 1) The minimum impedance rating of the amplifier being used.
-
Page 4: Installation And Wiring
Never go below an amplifier’s minimum impedance rating as this can cause damage to the amplifier. Both the EVC-100R and EVC-100S have minimum impedance ratings of 4 ohms. If connecting more than one speaker to the EVC-100R or EVC-100S, make sure not to exceed this minimum. - Page 5 The spring-loaded mechanism will hold the wires in place. 3. Connect the wires going to each speaker to the connector labeled SPEAKERS. Make sure to maintain proper polarity. 4. Check that the amplifier or receiver being used is turned off and then connect the wire coming from the amplifier to the connector labeled AMPLIFIER.
- Page 6 7. Install the volume control in the box or ring using the two longer screws provided. Be careful not to force the volume control into the ring or box as this will cause the connectors to become loose or may result in wires being forced out of the connectors. 8.
- Page 7 To amplifier Impedance switch L- R- R+ EVC-100R To speakers To amplifier Impedance switch To speakers EVC-100S...
- Page 8 54 db Lifetime Limited Warranty All Episode Volume Controls have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workman- ship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled.