Technical Data - BorMann BBC8500 User Manual

EN
Do not connect the red and black clamps together when the jump starter is in ready state.
Do not expose this device to temperatures above 60˚C or below -20˚C. Opera
the ba ery's life or even cause damage to the unit.
Do not submerge or expose this device to water, rain or snow, vapours or sprays.
Do not use this device in the presence of flammable fumes, gases or dust.
Do not use this device as a toy and make sure to keep it in a safe inaccessible place to kids. Do not insert objects into the jump start socket, the input ports or
output ports.
Do not modify or disassemble the jump starter.
Charge only by using the chargers provided with the device.
This product should be recycled or disposed of as per state and local guidelines.
1. Torch light / S.O.S signal
3. USB 5V/2.1A output port
4. Micro USB port
5. ON/OFF switch
6. Jumper cable output socket
7. Indicator lights
Indicator Lights (Not featured in all models)
To turn the devise ON
To turn the devise OFF
Charging the jump Starter
months by using the Micro USB cable.
Charging mobile devices (Picture B)
1. Select an appropriate USB cable for your mobile devices, and then plug one end of the USB cable into the 5V/2.1A USB output port of the jump starter.
2. Connect the other end to your mobile device.
connected into the jump start socket.
4. Start the vehicle
within 30 seconds.
6. Let the vehicle's engine running.
Step 1: Plug the smart jumper cables into the jump starter.
Warning: If the light does not turn green, this may indicate:
3
c

Technical Data

Capacity:
Input:
Output:
Start current:
Peak current:
Other features:
WWW.BORMANNTOOLS.COM
ay reduce the internal ba ery capacity and shorten
12000mAh
5V/2A
5V/2.1A, 12V Jump start
200A
400A
About 6,5 H
-20˚C ˜ 60˚C
>1000 cycles