Clients Tab; Rename The Connection; Disable Internet Access; Disable Local Access - Iridium AxcessPoint Connect User Manual

Hide thumbs Also See for AxcessPoint Connect:
Table of Contents

Advertisement

 
9.
Clients Tab 
In the Clients Tab is where you will see the connections to your Wi‐Fi hotspot.  You can rename the 
connections, disable their internet access and disable their local access.  
Rename the Connection 
 Right click on the rotating arrows next to the connection's name or hover over the connection's name and 
click the mouse for the drop down menu 
 Select <Rename> 
 A menu will pop up with the current name 
 Enter in a new name for the connection. 
 Click <OK> to accept changes and closes the pop up menu 
 This is the name that will show when this device connects to your Wi‐Fi hotspot 
Disable Internet Access 
 Hover your mouse over the connection's name and you will see a drop down menu 
 Select <Disable Internet Access> 
 You will see a red X over a globe next to the rotating arrows.  This indicates that the connection has been 
denied access to the Internet by not allowing it to connect to the Iridium network. 
 To allow Internet access, right click on the red X and select <Enable Internet Access> 
Disable Local Access 
 Hover your mouse over the connection's name and you will get a drop down menu 
 Select <Disable Local Access> 
 You will see a red X over a monitor icon near the connection's name.  This indicates that the connection 
has been denied access to the Wi‐Fi hotspot. 
 
To stop the hotspot connection, click the <Stop Hotspot> to close the hotspot and end the Iridium connection.   
If you are finished using AxcessPoint Connect, disconnect your phone from your laptop to avoid any unplanned  
usage charges.   Usage will be billed at standard rates on a per minute basis for airtime use.   
 
 
Page 8 of 17
Iridium AxcessPoint Connect User Manual

Advertisement

Table of Contents
loading

Related Products for Iridium AxcessPoint Connect

Table of Contents