Summary of Contents for MicroVision MV-2407sti-411
- Page 1 QUICK START GUIDE MV-2407sti-411 Short Throw Interactive PicoP Scanning Engine ® STARTER KIT...
- Page 2 MV-2407sti-411 SHORT THROW INTERACTIVE PICOP SCANNING ENGINE ® STARTER KIT The MV-2407sti-411 is part of MicroVision’s development platform for PicoP scanning technology, a scanning engine solution based on ® MicroVision’s proprietary laser beam scanning technology. This kit is a prototype produced by MicroVision to demonstrate interactive display functionality and enable application development.
- Page 3 SAFETY INFORMATION, CLASS The MV-2407sti unit embeds a CLASS 3R LASER PROJECTOR MODULE and complies with IEC 60825-1: 2014 (edition 3). This device also complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 56 dated May 08, 2019. The following safety labels are affixed at the factory.
-
Page 4: Cautions And Warnings
MV-2407sti Starter Kit For preventative maintenance or repair of performance-related issues, the system must be returned to MicroVision. See the Warranty in this Quick Start Guide for contact information to initiate a return. Do not remove label or enclosure around the projector module. -
Page 5: Power Supply
IN THE BOX 1. MV-2407sti-411 Starter Kit 2. Power supply 3. Micro-USB cable (x2) 4. Micro-HDMI cable MV-2407sti KEY DC Power In Micro-HDMI Video In Micro-USB2 Port (Touch Events) Micro-USB2 Port (Module Control) USB Type A Port Power Button Audio Jack... -
Page 6: Power On/Off
System Interface Board to a Type-A USB2 port on the host system. This USB interface can be used to control the PicoP Scanning Engine from the host system utilizing MicroVision’s SDKs. Power On/Off: 1. Turn on the system power by pressing the power button. -
Page 7: Service And Support
(such as FCC, UL, CE, etc.) with the exception of IEC 60825-1 Laser Safety. MicroVision assumes no liability for application assistance, customer’s product design, or software performance. - Page 8 Limited Warranty. MicroVision warrants that the Prototype will be free of defects in material and workmanship for ninety (90) days from the delivery date. MicroVision will at its option, repair or replace the Prototype or refund the purchase price paid by Customer for the defective Prototype.
- Page 9 MicroVision is not liable for loss of data or down time. MicroVision is not responsible for resolving software issues caused by Customer Components or third party software. LIMITATION OF LIABILLITY. IN NO EVENT WILL MICROVISION BE LIABLE TO CUSTOMER FOR ANY LOST PROFITS, LOST OPPORTUNITIES, OR ANY OTHER INCIDENTAL OR...
- Page 10 SPECIFICATIONS MATRIX Category Characteristic Specification Display Display Technology Laser beam scanning technology Performance Input Resolutions 1280 x 720 Output Resolution 1280 x 640 Brightness 65 lumens Enhanced Brightness 80 lumens (typical video content) Color Depth 24-bit true color, 16.7M colors Aspect Ratio 16:9 Throw Ratio...
- Page 11 Electronics Size ~50 x 83 mm Video Input Interface MIPI-DSI Version 1.2 Touch Event Interface USB2 HID Class Control Interface UART (with MicroVision SDK) Starter Kit Video Input Interface HDMI Version 1.3 Touch Event Interface USB2 HID Class Control Interface...
- Page 12 © 2019 MicroVision, Inc. All rights reserved. MicroVision and PicoP are registered trademarks of MicroVision, Inc. ® ® All other trademarks are property of their respective owners. DB0140007, Revision A.1, October 2019...
Need help?
Do you have a question about the MV-2407sti-411 and is the answer not in the manual?
Questions and answers