Advertisement
Quick Links
400W Submersible Water Pump
GLPUMP400
Assembly Instructions
(Please keep for future reference)
IMPORTANT - PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY
1
CHARLES BENTLEY AND SON LTD T/A:
NORTH ROAD, LOUGHBOROUGH, LEICESTERSHIRE, LE11 1QJ
customerservices@buydirect4u.co.uk
Advertisement
Summary of Contents for Charles Bentley & Son GARDEN GLPUMP400
- Page 1 400W Submersible Water Pump GLPUMP400 Assembly Instructions (Please keep for future reference) IMPORTANT - PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY CHARLES BENTLEY AND SON LTD T/A: NORTH ROAD, LOUGHBOROUGH, LEICESTERSHIRE, LE11 1QJ customerservices@buydirect4u.co.uk...
- Page 2 Before the first operation, please read the manual carefully! This manual contains important information about safety, installation, operation, maintenance, storage, and troubleshooting. Keep the instruction manual in a safe place to be able to find information in the future or for other users. Given the constant technology development and adaptation of the latest EU standards, changes may be carried out without prior notice.
- Page 3 Technical specifications Mains supply: 230-240V~50Hz Power rated: 400W Delivery rate max.: 7500l/h Delivery height max.: Water temperature max.: 35℃ Foreign bodies up to: Ø35mm Working depth max.: (Specifications are subject to change without notice.) Symbols Product conforms to relevant EU standards. Degree of protection Max.
- Page 4 safety. Notes on types of warnings in the manual: WARNING! This mark indicates instructions which must be followed in order to prevent accidents which could lead to serious bodily injury or death and/or lead to mechanical failure, breakdown, or damage. NOTE: This mark indicates hints of directions useful in the use of the product.
- Page 5 Keep these instructions for reference on any issues you may be uncertain about. When you hire or sell the machine, have all documents supplied go with it. General safety instructions WARNING! When using this machine, observe the following safety instructions to exclude the risk of personal injury or material damage.
- Page 6 socket equipped with an individual fuse of 6A. The electric circuit must be equipped with a residual current protection of 30mA sensitivity (FI relay). If the power cord is damaged during operation, immediately disconnect from the supply. Do not touch the cord and never work with damaged cord. Use only extension cords approved for outdoor use with adequate protection against splashing water.
- Page 7 Installation of the pump WARNING! It is forbidden to suspend the pump via the hose or the power cable! Hose (minimum of 3/4”) must be connected to the pressure outlet of the pump, either directly (1” and 5/4”,3/2”) or via a screw adapter. 3/4”...
-
Page 8: Troubleshooting
WARNING! Before every servicing, switch off the pump and remove the plug from the socket. If the pump is not going to be used for a long time or has to be removed for the winter months, rinse it out with water and allow it to dry. If there is a risk of frost, the pump must be emptied complete. - Page 9 CHARLES BENTLEY AND SON LTD T/A: NORTH ROAD, LOUGHBOROUGH, LEICESTERSHIRE, LE11 1QJ customerservices@buydirect4u.co.uk...