Subscribe to Our Youtube Channel
Summary of Contents for akkuteam VAS 5581
- Page 1 VAS 5581 Operating Instructions HV Measurement Adapter Theodor-Heuss-Straße 4 D-37412 Herzberg am Harz Telefon +49 5521 9981-0 +49 5521 9981-11 vas-service@akkuteam.de www.akkuteam.de...
-
Page 2: Table Of Contents
Operating Instructions HV Measurement Adapter VAS 5581 Table of Contents 1.0 Safety Instructions Safety DANGER! Refers to an imminent danger. Safety instructions ..................3 – 10 Instruction Not observing these risks can result in death or serious 1.1 Instructions for the manual ................ 11 injuries. - Page 3 Operating Instructions HV Measurement Adapter VAS 5581 General Intended The unit was manufactured in accordance with the state of the art The unit must only be used for the intended purposes. and the recognized safety-technical regulations. However, risks uses Any other uses are in violation of the intended uses.
- Page 4 Operating Instructions HV Measurement Adapter VAS 5581 Hazards In this case, the operating entity or user of the unit Safety steps Only operate units with a protective ground wire on a grid with due to grid during normal must determine whether the unit may be connected, possibly by...
- Page 5 Operating Instructions HV Measurement Adapter VAS 5581 In special circumstances, the intended application may be impacted Product The product warranty period for the unit is 2 years from the date of features in spite of adhering to the standardized emission threshold values warranty the invoice.
-
Page 6: Instructions For The Manual
Operating Instructions HV Measurement Adapter VAS 5581 Safety labeling 1.1 Instructions for the manual Devices with the CE marking meet the basic requirements of the low-voltage and electro-magnetic compatibility State of the art directive. This HV Measurement Adapter corresponds to the current state of the art. -
Page 7: Pictograph Legend
Operating Instructions HV Measurement Adapter VAS 5581 1.2 Pictograph legend 1.3 Labeling on the HV Measurement Adapters CE marking Risk of electrical shock Comply with all instructions and safety regulations This operating manual contains several sections with internationally referenced warning labels, hazard warnings and general instruction markings. -
Page 8: Safety Instructions
The VAS 5581 Measurement Adapter may only be used as described in the The product warranty is null and void as a result of inappropriate uses operating manual! Any modifications on the VAS 5581 HV Measure- of the measurement adapter that result in damage to the equipment. -
Page 9: Keyboard Assignments
Operating Instructions HV Measurement Adapter VAS 5581 3.0 Keyboard assignments Power supply plug OBD plug USB 2.0 port BMS connection cable Battery indicator On/Off switch "Battery empty", less than 30 %. "Battery half full", less than 60 % "Battery full", 100 % adds terminal 30. -
Page 10: Function
The battery is installed by loosening the 4 screws on the bottom – all operating manuals for the system components, specifi- of the VAS 5581 HV Measurement Adapter and opening the battery compartment by lifting the device bottom. Insert the battery and... - Page 11 The operational reliability is increased by installing a device- specific battery. NOTE! Only use device-specific batteries (VAS 5581/10)! (Part No. A 000606, ASE-No. 109 051 00 000). www.akkuteam.de V 1.0...
-
Page 12: Installing The Lithium-Ion Battery
4. When you are sure that you have connected the lithium-ion 1. Unscrew and remove the rear cover of the VAS 5581. battery in accordance with the instructions, screw the rear cover 2. Place the lithium-ion battery in of the VAS 5581 back on. -
Page 13: Battery Status Indicator And Charging The Battery
LED "Full Battery", too. For an efficient balancing the power supply or in the guided fault finding. Employing an incorrect adapter cable should stay connected to a VAS 5581 with built-in battery for at least may damage the vehicle. The VAS 5581/1 adapter cable is included in 12 hours. -
Page 14: Firmware Update
In order to upload an update revision of the firmware/software, The respectively selected impedance value is indicated by the yellow connect the VAS 5581 to a Windows PC via its USB port. Each new LED on the selection row. The measurement adapter is now ready for firmware revision comes with its own detailed instructions. -
Page 15: Product Warranty
The warranty expires when the measurement adapter was not used in accordance with the operating manual. Battery specifications In case of a defect, akkuteam will at its own discretion repair or replace Lithium-Ion battery 14.80 V 6750 mAh only the defective components. - Page 16 Operating Instructions HV Measurement Adapter VAS 5581 Environmental conditions Operating temperature 0 °C - +40 °C Storage temperature -40 °C - +65 °C Climate class Protection class IP20 Standards IEC 60950-1, UL 60950-1, C22.2 No. 60950-1, EN 61000-6-3:2007+A1:2011, EN61000-6-2:2005, ICES-003 Issue05 incl.
- Page 17 Theodor-Heuss-Straße 4 D-37412 Herzberg am Harz Phone +49 5521 9981-0 +49 5521 9981-11 vas-service@akkuteam.de www.akkuteam.de...
Need help?
Do you have a question about the VAS 5581 and is the answer not in the manual?
Questions and answers