U10C Service Manual
The measurements at the charger output should be: 450mA ~ 550mA.
2.6
USER INFORMATION TRANSFER
For OT-222, you can use the cloning tool to transfer user information to PC
with downloading cable.
(1). Find cloning tool on MLDC as below location:
(2). Install the cloning tool on your computer.
(3). The user manual on MLDC will show you how to use the tool:
ED
1.0
TCT mobile phones
All rights reserved. Passing on and copying this document, use and communication are not
permitted without authorization.
Figure 2.5 Connection Diagram
OT-222 Service Manual
Page:
26