Siemens WM12N269ES User Manual And Installation Instructions page 49

Table of Contents

Advertisement

Fault
The programme does
not start.
The door cannot
be opened.
The water is not drain-
ing.
Cause and troubleshooting
Press inicio / pausa + carga to start the pro-
2.
gramme.
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 38
is activated.
termin.
Check whether termin.
→ "Buttons", Page 22
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press inicio / pausa + carga to start the pro-
4.
gramme.
– –– is activated.
Continue the programme by selecting
pressing inicio / pausa + carga.
→ "Resuming the programme when the programme
status is Rinse Hold", Page 37
The temperature is too high.
Wait until the temperature has dropped.
→ "Cancelling the programme", Page 37
Water level is too high.
Start the
 programme.
Power failure.
Open the door using the emergency release.
→ "Emergency release", Page 55
Drain pipe or water outlet hose is blocked.
Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed.
Ensure that the drain pipe and water drain hose are
not kinked or trapped.
Drain pump is blocked.
→ "Cleaning the drain pump", Page 42
– –– is activated.
Continue the programme by selecting
pressing inicio / pausa + carga.
→ "Resuming the programme when the programme
status is Rinse Hold", Page 37
The water outlet hose is connected too high.
Troubleshooting en
is activated.
or
or
and
and
49

Advertisement

Table of Contents
loading

Table of Contents