Table of Contents
Advertisement
Fault
Creasing.
and programme
terminated.
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
The programme does
not start.
The length of the pro-
gramme changes dur-
ing the drying cycle.
Pumping noise.
Cause and troubleshooting
Activate the Anti-Crease function.
▶
→ "Buttons", Page 21
Condensation tank filled.
→ "Emptying the condensation container", Page 31.
1.
→ "Inserting the condensation container", Page 31.
2.
→ "Starting the programme", Page 28.
3.
Water drain hose is caught or jammed.
Ensure that the water drain hose is not kinked or
1.
trapped.
Route the water drain hose without kinks.
2.
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
→ "Connecting the water drain hose", Page 14
Water drain hose is blocked.
Rinse the water drain hose with tap water.
▶
The filter for the condensation tank is soiled.
→ "Clean the filter for the condensation tank.",
▶
Page 37.
The appliance uses condensation for the automatic
self-cleaning.
Not a fault – no action required.
▶
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
→ "Connecting the water drain hose", Page 14
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 32
▶
You have not pressed 卉始/添衣.
Press 卉始/添衣.
▶
No programme set.
→ "Setting a programme", Page 28.
1.
→ "Starting the programme", Page 28.
2.
The programme operation is optimised electronically.
This may change the programme duration.
Not a fault – no action required.
▶
Condensation pump active.
Not a fault – normal operating noise.
▶
Troubleshooting en
39
Advertisement
Table of Contents
