Download Print this page

Aimax AM8011 Instruction Manual

Wireless Mouse

AM8011 Instruction Manual

Package Contents

1. 2.4GHz Wireless Optical Mouse

2. Nano Receiver

3. Instruction Manual

1. Avoid looking directly into the light beam.

2. Do not mix batteries of different types; do not use new batteries with old ones.

3. Remove the batteries from the battery compartment if you will not be using the

mouse for an extended period.

4. Dead batteries should be immediately removed from the battery compartment

in order to avoid leakage.

5. Keep mouse and batteries away from fire, high heat or water.

6. Do not dissemble or replace parts of the mouse.

1. Remove the battery compartment cover and insert 1 x 1.5 V AA battery into the battery compartment in the

correct polarity.

2. Switch on your computer and connect the nano receiver to an available USB port.

3. Computer detects the USB receiver and installs it for use with the operating system.

4. Now the mouse is ready for use.

If the mouse does not function as expected, ensure that you have carefully checked

the following:

• The batteries are new and have been inserted correctly

• The receiver is correctly connected to the computer

System requirements:

• Windows 7/8/10/11 or Mac 10.X

Table of Contents

Do you have a question about the AM8011 and is the answer not in the manual?

Page 1 Wireless Mouse AM8011 Instruction Manual Package Contents 1. 2.4GHz Wireless Optical Mouse 2. Nano Receiver 3. Instruction Manual Safety Advice 1. Avoid looking directly into the light beam. 2. Do not mix batteries of different types; do not use new batteries with old ones.
Page 2 • USB port Power Rating: DC1.5V, 15mA,1 x AA battery RF frequency: 2.4GHz Optical sensor Resolution: 1200dpi Product Weight: 60 g Dimensions (W x H x D): ca. 63 x 37 x 103 mm Note: Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document.