Advertisement
Quick Links
Advertisement
Summary of Contents for Nitec EPR-203
- Page 1 OPERATION MANUAL Robot Positioner...
- Page 3 SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and main- tenance (servicing) instructions in the literature...
- Page 4 SAFETY INSTRUCTIONS PLEASE READ ALL THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCES. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE UNIT. Read Instructions Servicing All the safety and operating instructions should be Do not attempt to service this product yourself as read before the appliance is operated.
-
Page 5: Table Of Contents
Robot Positioner EPR-203 CONTENTS Page Page GENERAL ......1 DAILY MANTENANCE ....1 SPECIFICATIONS-FEATURES . -
Page 6: General
1 GENERAL This device is called Robot Positioner (EPR-203). refer to "Satellite Selector Operation Manual". By installing Parabola antenna for TVRO and con- We hope that you gain more knowledge on this trolling Satellite Selector, it automatically directs device to take a full advantage of its features and the Parabola antenna to the designated satellite. -
Page 7: Specifications-Features
2 SPECIFICATIONS-FEATURES SPECIFICATIONS Model Name : EPR-203 Motor Power Supply : 24 VDC (both azimuth and Elevation Motors) Motor Rating : 18 Watts (both azimuth and Elevation Motors) Control Shaft : 2-shaft control for azimuth and Elevation Motor Rated Rotation Speed... -
Page 8: Functions
3 FUNCTIONS... -
Page 9: Instruction
4 INSTRUCTION Once the Robot Positioner is installed, there is Please note the following at the time of no need for readjustment mechanically or installation. electrically. 1. Do not install the Robot Positioner up-side down. Bullhead installation side should be at the bottom. 2. -
Page 10: Before Operation
5 -3 Connecting the Attachement Cable Robot Positioner has a 4.6 ft (1.5 m) Attachment the Rear Panel of Satellite Selector with the Cable with 18 numbered wires at the end, and wiring number of Attachment Cable. This means each wire is connected to an U-shaped pressure- matching the wiring numbers indicated on attached terminal. -
Page 11: Operation Condition And Warning
8 OPERATION CONDITION AND WARNING The following conditions should be strictly observed for operation of the device. 1) Dish diameter 10 ft. or less 2) Dish depth 2 ft. or less 3) Dish weight 150 lbs. or less (for 175 lbs. ~ 290 lbs. use counterbalance) 4) Dish shape parabola 5) Dish centeroid... - Page 12 PRINTED IN JAPAN...