Page 1
Quick Start Guide Hanging mount for vandal dome, turret and fisheye cameras DWC-VFHMW WHAT’S IN THE BOX M3.0x 20mm with washers M3.0x 23mm Camera Mounting Screws Quick Setup Guide sets M3.0x 35mm NOTE: Download all your support materials and tools in one place.
Page 2
Quick Start Guide INSTALLATION Pipe Secure the hanging mount to the pole (NTP ¾ thread). Before attaching the camera to the hanging mount, remove the dome from the camera base. Pass wires through and make all necessary connections. Use the camera mounting screws (included with bracket) to secure NTP 3/4 TAP the camera to the mount cap.
Need help?
Do you have a question about the DWC-VFHMW and is the answer not in the manual?
Questions and answers