Troubleshooting - Crosley Dansette Bermuda CR6233F Instruction Manual

Hide thumbs Also See for Dansette Bermuda CR6233F:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
English
Turntable Maintenance
1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the
turntable mat or a record's edge.
2. Clean the stylus frequently with a soft brush with a back-to-front motion only.
3. Clean the records to get rid of dust or grease with a record cleaning brush
and record cleaning solution.
4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber
cloth.
Note: Do not use cleanser other that contains alcohol, benzene or any other harsh
chemicals, which might damage the paint and finish of the turntable.
** Crosley offers a product line of different cleaning accessories. Please
ask your retailer or check out our website www.crosleyradio.com for
more cleaning product information.

Troubleshooting

There is no power
• Power adaptor is not connected correctly.
• No power at the power outlet.
• To help save power consumption, some models will comply with ERP energy
saving standard. When there is no audio input for 20 minutes, their powers
will automatically cut-off. To turn power back on and resume playing, turn off
the power and turn it on again.
Power is on, but the platter does not turn
• Turntable mode is not selected.
• Turntable's drive belt has slipped off.
Turntable is spinning, but there is no sound or sound not loud enough
• Stylus protector is still on.
• The input gain of the amplified speaker or similar device may be too low.
Bluetooth is not functioning when it is under Bluetooth mode
• An auxiliary cable is plugged into the Aux In jack, unplug it.
8

Advertisement

Table of Contents
loading

Table of Contents