Omron BUP100SG Instruction Manual
Omron BUP100SG Instruction Manual

Omron BUP100SG Instruction Manual

Mounting brackets

Advertisement

Quick Links

Mounting Brackets BUP100SG / 300SG Instruction Manual
These brackets are used only for Omron uninterruptible power supply (UPS):
BUP100SG for BU1002SWG, and BUP300SG for BU3002SWG.
Important information for safe operation is described.
Be sure to read it before installation and start of use.
The safety symbols and their meaning used in this manual are as follows:
CAUTION
* Property damage means damage to houses/household effects, livestock, and pets
: Indicates prohibition. For example,
: Indicates obligation. For example,
Note that events categorized as a caution required matter also may cause more
serious results under certain conditions.
Do not install the unit in an undesignated direction.
l Dropping the unit may cause injury.
l The installation in an unspecified direction, the unit cannot be protected from a
battery fluid leakage.
Fix the unit securely with screws suitable for the material of the floor
surface at the installation site so that it can withstand the force caused by
vibration, etc.
l Confirm the material and thickness of the floor surface to be installed, and use
the provided screws when it is made of metal. When the floor surface is made
of concrete or wood, use the exclusive screws suitable for the material.
For installation on the rack, support and fix with the shelf board (base board)
for the rack and mounting brackets. When adding a battery unit, be sure to
install the battery unit under the main body unit. *Only for BUP300SG
l For installation on the rack, be sure to use shelf board (base board) for the rack
and mounting brackets. The weight cannot be supported with only front surface
brackets without the shelf board (base board) for the rack.
l Mass of the unit BU3002SWG : 35kg
When installing the unit on the rack, install it on the lower shelf of the rack.
l Dropping may cause injury.
Do not stack a plurality of UPSs or added battery units on the shelf board for
the rack.
l Use the shelf board for the rack for each device.

Safety precautions

Misuse may cause injury or property damage
indicates that disassembly is prohibited.
indicates that grounding is necessary.
Caution
– 1 –
:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BUP100SG and is the answer not in the manual?

Questions and answers

Summary of Contents for Omron BUP100SG

  • Page 1 Mounting Brackets BUP100SG / 300SG Instruction Manual These brackets are used only for Omron uninterruptible power supply (UPS): BUP100SG for BU1002SWG, and BUP300SG for BU3002SWG. Important information for safe operation is described. Be sure to read it before installation and start of use.
  • Page 2 Packing contents of BUP100SG ® ® L bracket (Large)..........4 L bracket (small) ..........4 Bracket mounting screws (M3) ......8 Floor mounting screws (M5) ....... 4 Compliance Inforamation Sheet ......1 n Installation <BU1002SWG> 1. Carefully put the UPS main body down on its side.
  • Page 3 2. Return the unit to the vertical position, and fix the four L-brackets “large” with the bracket mounting screws (8 pcs). Fix the unit on the floor with the floor mounting screws (4 pcs). Floor mounting screws (M5) Bracket mounting screws (M3) n Dimensions (mm) <BU1002SWG>...
  • Page 4 n L-bracket “large” (mm) L-bracket “small” (mm) Packing contents of BUP300SG ® ® L bracket ............4 Bracket mounting screws (M4) ......16 Floor and rack mounting screws (M5) ....4 Rack mounting nut (M5) ........4 Compliance Inforamation Sheet ......1 –...
  • Page 5 n Dimensions (mm) n Installation <Mounting the UPS in a vertical position> Remove the M4 screws (8 pcs) on the lower part of the side with a screwdriver and fix the L-brackets (4 pcs) with the removed screws. Fix the UPS on the floor with floor and rack mounting screws (4 pcs).
  • Page 6 When installing the UPS on the rack The UPS can be installed on the EIA/JIS 19-inch rack. Install the UPS on the shelf board (base board) that can sufficiently withstand the weight of the UPS. Carefully put the UPS or the additional battery unit down on its side, and remove the casters on the bottom surface.
  • Page 7 n Dimensions (mm) <Installing the BU3002SWG vertically> <Installing the BU3002SWG horizontally> No part or whole of this manual may be reproduced without permission. The contents of this manual are subject to change without notice. – 7 –...
  • Page 8 Omron representatives OMRON EUROPE B.V. +31 (0) 23 568 13 00 industrial.omron.eu Norway Austria Tel: +43 (0) 2236 377 800 Tel: +47 (0) 22 65 75 00 industrial.omron.at industrial.omron.no Belgium Poland Tel: +32 (0) 2 466 24 80 Tel: +48 22 458 66 66 industrial.omron.be...

This manual is also suitable for:

Bup300sg

Table of Contents