MSE Audio SOUNDSPHERE SS-ATB Owner's Manual

ATB Nomenclature & Assembly
BOOM BRACKET
LEG CHANNEL
PIVOT BRACKET
ANGLE ADJUSTING
HOLES & LOCKING
BOLT
1. Assemble the ATB to the loudspeaker's leg, with the 'U' bolts
supplied, as shown. Note that the stop bracket pad faces the
reflector.
2. Tighten the nylon locknuts on the 'U' bolts until almost snug.
3. Slide the ATB along the leg toward the reflector of the
loudspeaker until the Stop Bracket Pad firmly contacts the rim
of the reflector.
4. Secure the locknuts taking care to keep the Stop Bracket Pad
flat against the reflector rim.
Contact: MSE Audio, 855.663.5600 / 913.663.5600 / sales@mseaudio.com
STOP BRACKET
STOP BRACKET PAD
LEG OF LOUDSPEAKER
'U' BOLTS
SS-ATB - Adjustable Tilt Bracket
Assembly Details
Mounting the ATB to the BK-2 & BK-4
EYE BOLT
FLAT WASHER
LOCKNUT
1. Assemble the ATB to the loudspeaker's leg, with the 'U' bolts
supplied, as shown.
2. Tighten the nylon locknuts on the 'U' bolts until almost snug.
3. Slide the ATB along the leg toward the reflector of the
loudspeaker until the Stop Bracket Pad firmly contacts the rim
of the reflector.
4. Secure the locknuts taking care to keep the Stop Bracket Pad
flat against the reflector rim.
OWNER'S MANUAL
HEX BOLT
FLAT WASHER
© 2021 MSE Audio. Rev. 02.25.2021
360º of the Best Sound Around™